Имею ноутбук на следующем железе под LM 20.3 x64 xfce:
System:
Kernel: 5.4.0-122-generic x86_64 bits: 64 compiler: gcc v: 9.4.0
Desktop: Xfce 4.16.0 Distro: Linux Mint 20.3 Una base: Ubuntu 20.04 focal
Machine:
Type: Laptop System: ASUSTeK product: K53BR v: 1.0 serial: <filter>
Mobo: ASUSTeK model: K53BR v: 1.0 serial: <filter>
BIOS: American Megatrends v: 207 date: 04/25/2012
Battery:
ID-1: BAT1 charge: 51.5 Wh condition: 51.5/57.7 Wh (89%)
model: ASUSTEK PA3533U status: Full
CPU:
Topology: Dual Core model: AMD E-450 APU with Radeon HD Graphics bits: 64
type: MCP arch: Bobcat L2 cache: 512 KiB
flags: lm nx pae sse sse2 sse3 sse4a ssse3 svm bogomips: 6586
Speed: 1390 MHz min/max: 825/1650 MHz Core speeds (MHz): 1: 1530 2: 1578
Graphics:
Device-1: AMD Wrestler [Radeon HD 6320] vendor: ASUSTeK driver: radeon
v: kernel bus ID: 00:01.0
Device-2: AMD Seymour [Radeon HD 6400M/7400M Series] vendor: ASUSTeK
driver: radeon v: kernel bus ID: 01:00.0
Display: x11 server: X.Org 1.20.13 driver: ati,radeon
unloaded: fbdev,modesetting,vesa resolution: 1366x768~60Hz
OpenGL: renderer: AMD PALM (DRM 2.50.0 / 5.4.0-122-generic LLVM 12.0.0)
v: 3.3 Mesa 21.2.6 direct render: Yes
Audio:
Device-1: AMD Wrestler HDMI Audio vendor: ASUSTeK driver: snd_hda_intel
v: kernel bus ID: 00:01.1
Device-2: AMD SBx00 Azalia vendor: ASUSTeK driver: snd_hda_intel v: kernel
bus ID: 00:14.2
Sound Server: ALSA v: k5.4.0-122-generic
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: ASUSTeK driver: r8169 v: kernel port: d000 bus ID: 03:00.0
IF: enp3s0 state: down mac: <filter>
Device-2: Qualcomm Atheros AR9485 Wireless Network Adapter vendor: Lite-On
driver: ath9k v: kernel port: d000 bus ID: 04:00.0
IF: wlp4s0 state: up mac: <filter>
Device-3: TP-Link 802.11ac WLAN Adapter type: USB driver: rtl88XXau
bus ID: 1-2:6
IF: 붂>Z state: down mac: <filter>
Drives:
Local Storage: total: 223.57 GiB used: 9.54 GiB (4.3%)
ID-1: /dev/sda vendor: Kingston model: SA400S37240G size: 223.57 GiB
Partition:
ID-1: / size: 218.51 GiB used: 9.54 GiB (4.4%) fs: ext4 dev: /dev/sda5
Sensors:
System Temperatures: cpu: 6280.0 C mobo: N/A
Fan Speeds (RPM): N/A
GPU: device: radeon temp: 54 C device: radeon temp: 68 C
Info:
Processes: 191 Uptime: 41m Memory: 7.38 GiB used: 1.58 GiB (21.5%)
Init: systemd runlevel: 5 Compilers: gcc: 9.4.0 Shell: bash v: 5.0.17
inxi: 3.0.38
Kernel: 5.4.0-122-generic x86_64 bits: 64 compiler: gcc v: 9.4.0
Desktop: Xfce 4.16.0 Distro: Linux Mint 20.3 Una base: Ubuntu 20.04 focal
Machine:
Type: Laptop System: ASUSTeK product: K53BR v: 1.0 serial: <filter>
Mobo: ASUSTeK model: K53BR v: 1.0 serial: <filter>
BIOS: American Megatrends v: 207 date: 04/25/2012
Battery:
ID-1: BAT1 charge: 51.5 Wh condition: 51.5/57.7 Wh (89%)
model: ASUSTEK PA3533U status: Full
CPU:
Topology: Dual Core model: AMD E-450 APU with Radeon HD Graphics bits: 64
type: MCP arch: Bobcat L2 cache: 512 KiB
flags: lm nx pae sse sse2 sse3 sse4a ssse3 svm bogomips: 6586
Speed: 1390 MHz min/max: 825/1650 MHz Core speeds (MHz): 1: 1530 2: 1578
Graphics:
Device-1: AMD Wrestler [Radeon HD 6320] vendor: ASUSTeK driver: radeon
v: kernel bus ID: 00:01.0
Device-2: AMD Seymour [Radeon HD 6400M/7400M Series] vendor: ASUSTeK
driver: radeon v: kernel bus ID: 01:00.0
Display: x11 server: X.Org 1.20.13 driver: ati,radeon
unloaded: fbdev,modesetting,vesa resolution: 1366x768~60Hz
OpenGL: renderer: AMD PALM (DRM 2.50.0 / 5.4.0-122-generic LLVM 12.0.0)
v: 3.3 Mesa 21.2.6 direct render: Yes
Audio:
Device-1: AMD Wrestler HDMI Audio vendor: ASUSTeK driver: snd_hda_intel
v: kernel bus ID: 00:01.1
Device-2: AMD SBx00 Azalia vendor: ASUSTeK driver: snd_hda_intel v: kernel
bus ID: 00:14.2
Sound Server: ALSA v: k5.4.0-122-generic
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: ASUSTeK driver: r8169 v: kernel port: d000 bus ID: 03:00.0
IF: enp3s0 state: down mac: <filter>
Device-2: Qualcomm Atheros AR9485 Wireless Network Adapter vendor: Lite-On
driver: ath9k v: kernel port: d000 bus ID: 04:00.0
IF: wlp4s0 state: up mac: <filter>
Device-3: TP-Link 802.11ac WLAN Adapter type: USB driver: rtl88XXau
bus ID: 1-2:6
IF: 붂>Z state: down mac: <filter>
Drives:
Local Storage: total: 223.57 GiB used: 9.54 GiB (4.3%)
ID-1: /dev/sda vendor: Kingston model: SA400S37240G size: 223.57 GiB
Partition:
ID-1: / size: 218.51 GiB used: 9.54 GiB (4.4%) fs: ext4 dev: /dev/sda5
Sensors:
System Temperatures: cpu: 6280.0 C mobo: N/A
Fan Speeds (RPM): N/A
GPU: device: radeon temp: 54 C device: radeon temp: 68 C
Info:
Processes: 191 Uptime: 41m Memory: 7.38 GiB used: 1.58 GiB (21.5%)
Init: systemd runlevel: 5 Compilers: gcc: 9.4.0 Shell: bash v: 5.0.17
inxi: 3.0.38
проблема заключается в следующем: после установки драйвера rtl8812au система начинает видеть 5Ггц сети, но не может к ним подключиться (постоянно просит пароль). Немного покопавшись я обнаружил, что адаптеру не присваивается MAC-адрес, мб поэтому не подключается к сети. 붂>Z - это и есть адаптер, при извлечении из юсб он пропадает
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enp3s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel state DOWN mode DEFAULT group default qlen 1000
link/ether 10:bf:48:d9:df:76 brd ff:ff:ff:ff:ff:ff
3: wlp4s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DORMANT group default qlen 1000
link/ether 74:e5:43:02:f0:41 brd ff:ff:ff:ff:ff:ff
4: 붂>Z: <NO-CARRIER,BROADCAST,MULTICAST,UP,LOWER_UP> mtu 2312 qdisc mq state DORMANT mode DORMANT group default qlen 1000
link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enp3s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel state DOWN mode DEFAULT group default qlen 1000
link/ether 10:bf:48:d9:df:76 brd ff:ff:ff:ff:ff:ff
3: wlp4s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DORMANT group default qlen 1000
link/ether 74:e5:43:02:f0:41 brd ff:ff:ff:ff:ff:ff
4: 붂>Z: <NO-CARRIER,BROADCAST,MULTICAST,UP,LOWER_UP> mtu 2312 qdisc mq state DORMANT mode DORMANT group default qlen 1000
link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enp3s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel state DOWN mode DEFAULT group default qlen 1000
link/ether 10:bf:48:d9:df:76 brd ff:ff:ff:ff:ff:ff
3: wlp4s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DORMANT group default qlen 1000
link/ether 74:e5:43:02:f0:41 brd ff:ff:ff:ff:ff:ff
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enp3s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel state DOWN mode DEFAULT group default qlen 1000
link/ether 10:bf:48:d9:df:76 brd ff:ff:ff:ff:ff:ff
3: wlp4s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DORMANT group default qlen 1000
link/ether 74:e5:43:02:f0:41 brd ff:ff:ff:ff:ff:ff
Так же я пробовал установить пакетную прошивку
Чтение списков пакетов… Готово
Построение дерева зависимостей
Чтение информации о состоянии… Готово
E: Невозможно найти пакет firmware-iwlwifi
Построение дерева зависимостей
Чтение информации о состоянии… Готово
E: Невозможно найти пакет firmware-iwlwifi