В Skype дело иначе, - работало, но по разному. Зачастую было так что при соединении меня было слышно по "мультяшному", голос становился писклявым будто из "том и джери", - решалось перезапуском соединения видеозвонка.
Микрофон встроенный в камеру Webcam C200. В Windows на данной камере со звуком проблем не было никаких (на LMDE 5 перешёл на неделе).
Выкладываю данные команды pacmd list-sources
Код: Выделить всё
3 source(s) available.
* index: 0
name: <alsa_input.usb-046d_0802_87EC6590-02.mono-fallback>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9040
volume: mono: 59111 / 90% / -2,69 dB
balance 0,00
base volume: 20724 / 32% / -30,00 dB
volume steps: 65537
muted: no
current latency: 0,00 ms
max rewind: 0 KiB
sample spec: s16le 1-канальный 4800
channel map: mono
Моно
used by: 0
linked by: 0
configured latency: 0,00 ms; range is 0,50 .. 2000,00 ms
card: 1 <alsa_card.usb-046d_0802_87EC6590-02>
module: 7
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "USB Audio"
alsa.id = "USB Audio"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "USB Device 0x46d:0x802"
alsa.long_card_name = "USB Device 0x46d:0x802 at usb-0000:00:12.2-2, high speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:12.2-usb-0:2:1.2"
sysfs.path = "/devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2:1.2/sound/card1"
udev.id = "usb-046d_0802_87EC6590-02"
device.bus = "usb"
device.vendor.id = "046d"
device.vendor.name = "Logitech, Inc."
device.product.id = "0802"
device.product.name = "Webcam C200"
device.serial = "046d_0802_87EC6590"
device.form_factor = "webcam"
device.string = "hw:1"
device.buffering.buffer_size = "192000"
device.buffering.fragment_size = "96000"
device.access_mode = "mmap+timer"
device.profile.name = "mono-fallback"
device.profile.description = "Моно"
device.description = "Webcam C200 Моно"
module-udev-detect.discovered = "1"
device.icon_name = "camera-web-usb"
ports:
analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-input-microphone"
active port: <analog-input-mic>
index: 2
name: <alsa_input.pci-0000_00_14.2.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9039
volume: front-left: 10387 / 16% / -48,00 dB, front-right: 10387 / 16% / -48,00 dB
balance 0,00
base volume: 6554 / 10% / -60,00 dB
volume steps: 65537
muted: no
current latency: 0,00 ms
max rewind: 0 KiB
sample spec: s16le 2-канальный 4410
channel map: front-left,front-right
Стерео
used by: 0
linked by: 0
configured latency: 0,00 ms; range is 0,50 .. 1999,82 ms
card: 2 <alsa_card.pci-0000_00_14.2>
module: 8
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC892 Analog"
alsa.id = "ALC892 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA ATI SB"
alsa.long_card_name = "HDA ATI SB at 0xfcef4000 irq 16"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:14.2"
sysfs.path = "/devices/pci0000:00/0000:00:14.2/sound/card0"
device.bus = "pci"
device.vendor.id = "1002"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
device.product.id = "4383"
device.product.name = "SBx00 Azalia (Intel HDA)"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "352768"
device.buffering.fragment_size = "176384"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Аналоговый стерео"
device.description = "Встроенное аудио Аналоговый стерео"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
analog-input-front-mic: Front Microphone (priority 8500, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-input-microphone"
analog-input-rear-mic: Rear Microphone (priority 8200, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-input-microphone"
analog-input-linein: Line In (priority 8100, latency offset 0 usec, available: no)
properties:
active port: <analog-input-front-mic>
index: 12
name: <alsa_output.pci-0000_00_14.2.analog-surround-51.monitor>
driver: <module-alsa-card.c>
flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 1030
volume: front-left: 65536 / 100% / 0,00 dB, front-right: 65536 / 100% / 0,00 dB, rear-left: 65536 / 100% / 0,00 dB, rear-right: 65536 / 100% / 0,00 dB, front-center: 65536 / 100% / 0,00 dB, lfe: 65536 / 100% / 0,00 dB
balance 0,00
base volume: 65536 / 100% / 0,00 dB
volume steps: 65537
muted: no
current latency: 0,00 ms
max rewind: 0 KiB
sample spec: s16le 6-канальный 4410
channel map: front-left,front-right,rear-left,rear-right,front-center,lfe
Объёмный 5.1
used by: 0
linked by: 0
configured latency: 0,00 ms; range is 0,50 .. 1999,82 ms
monitor_of: 10
card: 2 <alsa_card.pci-0000_00_14.2>
module: 8
properties:
device.description = "Monitor of Встроенное аудио Аналоговый объёмный 5.1"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "HDA ATI SB"
alsa.long_card_name = "HDA ATI SB at 0xfcef4000 irq 16"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:14.2"
sysfs.path = "/devices/pci0000:00/0000:00:14.2/sound/card0"
device.bus = "pci"
device.vendor.id = "1002"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
device.product.id = "4383"
device.product.name = "SBx00 Azalia (Intel HDA)"
device.form_factor = "internal"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
