Ошибка при изменении гц

Правила форума
Как правильно задавать вопросы Правильно сформулированный вопрос и его грамотное оформление способствует высокой вероятности получения достаточно содержательного и по существу ответа. Общая рекомендация по составлению тем: 1. Версия ОС вместе с разрядностью. Пример: LM 18.1 x64, LM Sarah x32 2. DE. Если вопрос касается двух, то через запятую. (xfce, KDE, cinnamon, mate) 3. Какое железо. (достаточно вывод inxi -Fxz в спойлере (как пользоваться спойлером смотрим здесь)) или же дать ссылку на hw-probe 4. Суть. Желательно с выводом консоли, логами. 5. Скрин. Просьба указывать 1, 2 и 3 независимо от того, имеет ли это отношение к вопросу или нет. Так же не забываем об общих правилах Как пример вот

Автор темы
Jexly
Сообщения: 9
Зарегистрирован: 30 ноя 2019, 16:26

Ошибка при изменении гц

Сообщение Jexly » 30 ноя 2019, 16:33

Доброго времени суток! Столкнулся с такой ошибкой, что при изменении гц монитора, у меня выходит ошибка. Перечитал уже кучу всего, ничего не помогает.

Ввожу

Код: Выделить всё

cvt 1920 1080 120
Далее ввожу

Код: Выделить всё

xrandr --newmode "1920x1080_120.00"  369.50  1920 2080 2288 2656  1080 1083 1088 1160 -hsync +vsync
Далее

Код: Выделить всё

xrandr --verbose --addmode LVDS-0 "1920x1080_120.00"
И получаю ошибку

Код: Выделить всё

X Error of failed request:  BadMatch (invalid parameter attributes)
  Major opcode of failed request:  140 (RANDR)
  Minor opcode of failed request:  18 (RRAddOutputMode)
  Serial number of failed request:  33
  Current serial number in output stream:  34
Почему? Из-за чего это?

Аватара пользователя

slant
Сообщения: 2074
Зарегистрирован: 21 июн 2017, 15:09
Решено: 35
Благодарил (а): 18 раз
Поблагодарили: 890 раз

Ошибка при изменении гц

Сообщение slant » 30 ноя 2019, 16:56

Правильно сформулированный вопрос и его грамотное оформление способствует высокой вероятности получения достаточно содержательного и по существу ответа. Общая рекомендация по составлению тем: 1. Версия ОС вместе с разрядностью. Пример: LM 18.1 x64, LM Sarah x32 2. DE. Если вопрос касается двух, то через запятую. (xfce, KDE, cinnamon, mate) 3. Какое железо. (достаточно вывод inxi -Fxz в спойлере (как пользоваться спойлером смотрим здесь)) или же дать ссылку на hw-probe 4. Суть. Желательно с выводом консоли, логами. 5. Скрин. Просьба указывать 1, 2 и 3 независимо от того, имеет ли это отношение к вопросу или нет.


Автор темы
Jexly
Сообщения: 9
Зарегистрирован: 30 ноя 2019, 16:26

Ошибка при изменении гц

Сообщение Jexly » 30 ноя 2019, 18:47

1. У меня Elementary OS, больше я ничего не знаю...
2. Что это? Я извиняюсь за такие глупые вопросы, но я лишь недавно перешел на линукс
3.
System:    Host: Jexly-PC Kernel: 4.15.0-70-generic x86_64 bits: 64 gcc: 7.4.0
           Desktop: Gnome  (Gtk 3.22.30-1ubuntu4) Distro: elementary OS 5.0 Juno
Machine:   Device: laptop System: LENOVO product: 20193 v: Lenovo IdeaPad Y500 serial: N/A
           Mobo: LENOVO model: INVALID v: 31900004WIN8 STD SGL serial: N/A
           UEFI: LENOVO v: 6BCN44WW(V2.04) date: 05/21/2013
Battery    BAT1: charge: 52.9 Wh 100.0% condition: 52.9/62.7 Wh (84%) model: LENOVO PABAS0241231 status: Full
CPU:       Dual core Intel Core i5-3230M (-MT-MCP-) arch: Ivy Bridge rev.9 cache: 3072 KB
           flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 10376
           clock speeds: max: 3200 MHz 1: 1496 MHz 2: 1678 MHz 3: 1755 MHz 4: 1950 MHz
Graphics:  Card-1: NVIDIA GK107M [GeForce GT 750M] bus-ID: 01:00.0
           Card-2: NVIDIA GK107M [GeForce GT 750M] bus-ID: 02:00.0
           Display Server: x11 (X.Org 1.19.6 ) driver: nvidia Resolution: 1920x1080@59.93hz
           OpenGL: renderer: GeForce GT 750M/PCIe/SSE2 version: 4.6.0 NVIDIA 390.116 Direct Render: Yes
Audio:     Card-1 NVIDIA GK107 HDMI Audio Controller driver: snd_hda_intel bus-ID: 01:00.1
           Card-2 Intel 7 Series/C216 Family High Definition Audio Controller
           driver: snd_hda_intel bus-ID: 00:1b.0
           Card-3 Logitech Webcam B500 driver: USB Audio usb-ID: 001-007
           Sound: Advanced Linux Sound Architecture v: k4.15.0-70-generic
Network:   Card-1: Qualcomm Atheros AR8161 Gigabit Ethernet driver: alx port: 2000 bus-ID: 03:00.0
           IF: enp3s0 state: up speed: 100 Mbps duplex: full mac: <filter>
           Card-2: Intel Centrino Wireless-N 2230 driver: iwlwifi bus-ID: 04:00.0
           IF: wlp4s0 state: down mac: <filter>
Drives:    HDD Total Size: 240.1GB (6.8% used)
           ID-1: /dev/sda model: KINGSTON_SA400S3 size: 240.1GB
Partition: ID-1: / size: 218G used: 15G (7%) fs: ext4 dev: /dev/dm-0
           ID-2: swap-1 size: 1.02GB used: 0.00GB (0%) fs: swap dev: /dev/dm-1
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 55.0C mobo: N/A gpu: 0.0:48C
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 236 Uptime: 2:46 Memory: 2682.1/7923.1MB Init: systemd runlevel: 5 Gcc sys: 7.4.0
           Client: Shell (bash 4.4.201) inxi: 2.3.56 
4. Описал выше
5. Описал текстом, скринить консоль не особо нужно я так думаю
Последний раз редактировалось пользователем 1 rogoznik; всего редактировалось раз: 1
Причина: bbcode

Аватара пользователя

slant
Сообщения: 2074
Зарегистрирован: 21 июн 2017, 15:09
Решено: 35
Благодарил (а): 18 раз
Поблагодарили: 890 раз

Ошибка при изменении гц

Сообщение slant » 30 ноя 2019, 22:50

Jexly писал(а):
30 ноя 2019, 16:33
Столкнулся с такой ошибкой, что при изменении гц монитора, у меня выходит ошибка. Перечитал уже кучу всего, ничего не помогает.
И не поможет. С чего вы вообще взяли что матрица вашего ноутбука поддерживает такую частоту? У вас сейчас уже работает режим 1920x1080@59.93hz - это его потолок. Все. Ничего больше сделать нельзя.


Автор темы
Jexly
Сообщения: 9
Зарегистрирован: 30 ноя 2019, 16:26

Ошибка при изменении гц

Сообщение Jexly » 01 дек 2019, 10:10

Ибо я на винде пробовал изменять с 60 на 120, и все было идеально

Аватара пользователя

slant
Сообщения: 2074
Зарегистрирован: 21 июн 2017, 15:09
Решено: 35
Благодарил (а): 18 раз
Поблагодарили: 890 раз

Ошибка при изменении гц

Сообщение slant » 01 дек 2019, 11:10

Jexly писал(а):
01 дек 2019, 10:10
Ибо я на винде пробовал изменять с 60 на 120, и все было идеально
Позвольте усомнится. Железо 2013-года, когда о 120Hz на LCD еще и на стационарных мониторах почти не слышали. Где было - трубили на весь мир как о невероятном прорыве. На сайте lenovo про этот ноут ничего подобного не говорится, никаких упоминаний о 120Hz нет нигде. Хвалят этот ноут только за наличие FullHD разрешения (1920x1080). В обзорах, какие на него нашел, про 120Hz ни слова. Так что - не верю. Разве что, там уже кастом матрица стоит. Но это уже отдельный случай...


Автор темы
Jexly
Сообщения: 9
Зарегистрирован: 30 ноя 2019, 16:26

Ошибка при изменении гц

Сообщение Jexly » 01 дек 2019, 11:44

Я врать буду что-ли насчет 120гц? Ну-ну...

Аватара пользователя

slant
Сообщения: 2074
Зарегистрирован: 21 июн 2017, 15:09
Решено: 35
Благодарил (а): 18 раз
Поблагодарили: 890 раз

Ошибка при изменении гц

Сообщение slant » 01 дек 2019, 11:54

Есть такое понятие: "добросовестное заблуждение". Подразумевает не ложь, а просто уверенность в ошибочном.

Файл /var/log/Xorg.0.log покажите. Посмотрим как ваше железо Х-ы опознают.


Автор темы
Jexly
Сообщения: 9
Зарегистрирован: 30 ноя 2019, 16:26

Ошибка при изменении гц

Сообщение Jexly » 01 дек 2019, 11:58

Но я уверен на 100%, что через панельку nvidia я мог ставить 120гц без проблем


Автор темы
Jexly
Сообщения: 9
Зарегистрирован: 30 ноя 2019, 16:26

Ошибка при изменении гц

Сообщение Jexly » 01 дек 2019, 12:16

[ 39.322]
X.Org X Server 1.19.6
Release Date: 2017-12-20
[ 39.322] X Protocol Version 11, Revision 0
[ 39.322] Build Operating System: Linux 4.4.0-148-generic x86_64 Ubuntu
[ 39.322] Current Operating System: Linux Jexly-PC 4.15.0-70-generic #79-Ubuntu SMP Tue Nov 12 10:36:11 UTC 2019 x86_64
[ 39.322] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-70-generic root=/dev/mapper/elementary--vg-root ro quiet splash vt.handoff=1
[ 39.322] Build Date: 03 June 2019 08:10:35AM
[ 39.322] xorg-server 2:1.19.6-1ubuntu4.3 (For technical support please see http://www.ubuntu.com/support)
[ 39.322] Current version of pixman: 0.34.0
[ 39.322] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 39.322] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 39.322] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Dec 1 10:44:06 2019
[ 39.322] (==) Using config file: "/etc/X11/xorg.conf"
[ 39.322] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 39.323] (==) ServerLayout "Layout0"
[ 39.323] (**) |-->Screen "Screen0" (0)
[ 39.323] (**) | |-->Monitor "Monitor0"
[ 39.324] (**) | |-->Device "Device0"
[ 39.324] (**) | |-->GPUDevice "Device0"
[ 39.324] (**) |-->Input Device "Keyboard0"
[ 39.324] (**) |-->Input Device "Mouse0"
[ 39.324] (**) Option "Xinerama" "0"
[ 39.324] (==) Automatically adding devices
[ 39.324] (==) Automatically enabling devices
[ 39.324] (==) Automatically adding GPU devices
[ 39.324] (==) Automatically binding GPU devices
[ 39.324] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 39.324] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 39.324] Entry deleted from font path.
[ 39.324] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 39.324] Entry deleted from font path.
[ 39.324] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 39.324] Entry deleted from font path.
[ 39.324] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 39.324] Entry deleted from font path.
[ 39.324] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 39.324] Entry deleted from font path.
[ 39.324] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 39.324] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 39.324] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 39.324] (WW) Disabling Keyboard0
[ 39.324] (WW) Disabling Mouse0
[ 39.324] (II) Loader magic: 0x55eb1174b020
[ 39.324] (II) Module ABI versions:
[ 39.324] X.Org ANSI C Emulation: 0.4
[ 39.324] X.Org Video Driver: 23.0
[ 39.324] X.Org XInput driver : 24.1
[ 39.324] X.Org Server Extension : 10.0
[ 39.324] (++) using VT number 7

[ 39.324] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 39.325] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 39.325] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 39.326] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/x86_64-linux-gnu/nvidia/xorg,/usr/lib/xorg/modules"
[ 39.326] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/x86_64-linux-gnu/nvidia/xorg,/usr/lib/x86_64-linux-gnu/nvidia/xorg,/usr/lib/xorg/modules"
[ 39.327] (--) PCI:*(0:1:0:0) 10de:0fe4:17aa:3802 rev 161, Mem @ 0xb3000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/131072
[ 39.327] (--) PCI: (0:2:0:0) 10de:0fe4:17aa:3802 rev 161, Mem @ 0xb2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128
[ 39.327] (II) LoadModule: "glx"
[ 39.327] (II) Loading /usr/lib/x86_64-linux-gnu/nvidia/xorg/libglx.so
[ 39.374] (II) Module glx: vendor="NVIDIA Corporation"
[ 39.374] compiled for 4.0.2, module version = 1.0.0
[ 39.374] Module class: X.Org Server Extension
[ 39.374] (II) NVIDIA GLX Module 390.116 Sun Jan 27 06:24:32 PST 2019
[ 39.374] (II) LoadModule: "nvidia"
[ 39.374] (II) Loading /usr/lib/x86_64-linux-gnu/nvidia/xorg/nvidia_drv.so
[ 39.378] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 39.378] compiled for 4.0.2, module version = 1.0.0
[ 39.378] Module class: X.Org Video Driver
[ 39.379] (II) NVIDIA dlloader X Driver 390.116 Sun Jan 27 05:57:42 PST 2019
[ 39.379] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 39.387] (II) Loading sub module "fb"
[ 39.387] (II) LoadModule: "fb"
[ 39.387] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 39.387] (II) Module fb: vendor="X.Org Foundation"
[ 39.387] compiled for 1.19.6, module version = 1.0.0
[ 39.387] ABI class: X.Org ANSI C Emulation, version 0.4
[ 39.387] (II) Loading sub module "wfb"
[ 39.388] (II) LoadModule: "wfb"
[ 39.388] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 39.388] (II) Module wfb: vendor="X.Org Foundation"
[ 39.388] compiled for 1.19.6, module version = 1.0.0
[ 39.388] ABI class: X.Org ANSI C Emulation, version 0.4
[ 39.388] (II) Loading sub module "ramdac"
[ 39.388] (II) LoadModule: "ramdac"
[ 39.388] (II) Module "ramdac" already built-in
[ 39.399] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 39.399] (==) NVIDIA(0): RGB weight 888
[ 39.399] (==) NVIDIA(0): Default visual is TrueColor
[ 39.399] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 39.400] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[ 39.400] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[ 39.400] (**) NVIDIA(0): Enabling 2D acceleration
[ 39.636] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[ 39.636] (--) NVIDIA(0): CRT-0
[ 39.636] (--) NVIDIA(0): DFP-0 (boot)
[ 39.636] (--) NVIDIA(0): DFP-1
[ 39.637] (II) NVIDIA(0): NVIDIA GPU GeForce GT 750M (GK107) at PCI:1:0:0 (GPU-0)
[ 39.637] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 39.637] (--) NVIDIA(0): VideoBIOS: 80.07.9d.00.11
[ 39.637] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 39.638] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 39.638] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 39.638] (--) NVIDIA(GPU-0):
[ 39.639] (--) NVIDIA(GPU-0): LGD (DFP-0): connected
[ 39.639] (--) NVIDIA(GPU-0): LGD (DFP-0): Internal LVDS
[ 39.639] (--) NVIDIA(GPU-0): LGD (DFP-0): 330.0 MHz maximum pixel clock
[ 39.639] (--) NVIDIA(GPU-0):
[ 39.639] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 39.639] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 39.639] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 39.639] (--) NVIDIA(GPU-0):
[ 39.640] (WW) NVIDIA(0): No valid modes for "DFP-0:1920x1080_120.00"; removing.
[ 39.640] (WW) NVIDIA(0):
[ 39.640] (WW) NVIDIA(0): Unable to validate any modes; falling back to the default mode
[ 39.640] (WW) NVIDIA(0): "nvidia-auto-select".
[ 39.640] (WW) NVIDIA(0):
[ 39.640] (II) NVIDIA(0): Validated MetaModes:
[ 39.640] (II) NVIDIA(0): "DFP-0:nvidia-auto-select"
[ 39.640] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 39.642] (--) NVIDIA(0): DPI set to (139, 144); computed from "UseEdidDpi" X config
[ 39.642] (--) NVIDIA(0): option
[ 39.642] (--) Depth 24 pixmap format is 32 bpp
[ 39.847] (--) NVIDIA(0): Valid display device(s) on GPU-1 at PCI:2:0:0
[ 39.847] (--) NVIDIA(0): CRT-0
[ 39.847] (--) NVIDIA(0): DFP-0
[ 39.847] (--) NVIDIA(0): DFP-1
[ 39.850] (--) NVIDIA(GPU-1): CRT-0: disconnected
[ 39.850] (--) NVIDIA(GPU-1): CRT-0: 400.0 MHz maximum pixel clock
[ 39.850] (--) NVIDIA(GPU-1):
[ 39.852] (--) NVIDIA(GPU-1): DFP-0: disconnected
[ 39.852] (--) NVIDIA(GPU-1): DFP-0: Internal LVDS
[ 39.852] (--) NVIDIA(GPU-1): DFP-0: 330.0 MHz maximum pixel clock
[ 39.852] (--) NVIDIA(GPU-1):
[ 39.852] (--) NVIDIA(GPU-1): DFP-1: disconnected
[ 39.852] (--) NVIDIA(GPU-1): DFP-1: Internal TMDS
[ 39.852] (--) NVIDIA(GPU-1): DFP-1: 165.0 MHz maximum pixel clock
[ 39.852] (--) NVIDIA(GPU-1):
[ 39.878] (II) NVIDIA(GPU-1): NVIDIA GPU GeForce GT 750M (GK107) at PCI:2:0:0 (GPU-1)
[ 39.878] (--) NVIDIA(GPU-1): Memory: 2097152 kBytes
[ 39.878] (--) NVIDIA(GPU-1): VideoBIOS: 80.07.95.00.1a
[ 39.878] (II) NVIDIA(GPU-1): Detected PCI Express Link width: 16X
[ 39.879] (II) NVIDIA: Using 6144.00 MB of virtual memory for indirect memory
[ 39.879] (II) NVIDIA: access.
[ 39.910] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
[ 40.892] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 40.892] (==) NVIDIA(0): Backing store enabled
[ 40.892] (==) NVIDIA(0): Silken mouse enabled
[ 40.893] (==) NVIDIA(0): DPMS enabled
[ 40.893] (WW) NVIDIA(0): Option "TwinView" is not used
[ 40.893] (II) Loading sub module "dri2"
[ 40.893] (II) LoadModule: "dri2"
[ 40.893] (II) Module "dri2" already built-in
[ 40.893] (II) NVIDIA(0): [DRI2] Setup complete
[ 40.893] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 40.894] (--) RandR disabled
[ 40.896] (II) SELinux: Disabled on system
[ 40.896] (II) Initializing extension GLX
[ 40.896] (II) Indirect GLX disabled.
[ 40.954] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 40.954] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 40.954] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 40.954] (II) LoadModule: "libinput"
[ 40.954] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 40.956] (II) Module libinput: vendor="X.Org Foundation"
[ 40.956] compiled for 1.19.6, module version = 0.27.1
[ 40.956] Module class: X.Org XInput Driver
[ 40.956] ABI class: X.Org XInput driver, version 24.1
[ 40.956] (II) Using input driver 'libinput' for 'Power Button'
[ 40.956] (**) Power Button: always reports core events
[ 40.956] (**) Option "Device" "/dev/input/event3"
[ 40.956] (**) Option "_source" "server/udev"
[ 40.957] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 40.957] (II) event3 - Power Button: device is a keyboard
[ 40.957] (II) event3 - Power Button: device removed
[ 40.980] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 40.980] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 40.980] (**) Option "xkb_model" "pc105"
[ 40.980] (**) Option "xkb_layout" "us,ru"
[ 40.980] (**) Option "xkb_variant" ","
[ 40.980] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[ 41.006] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 41.006] (II) event3 - Power Button: device is a keyboard
[ 41.007] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 41.007] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 41.007] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 41.007] (II) Using input driver 'libinput' for 'Power Button'
[ 41.007] (**) Power Button: always reports core events
[ 41.007] (**) Option "Device" "/dev/input/event0"
[ 41.007] (**) Option "_source" "server/udev"
[ 41.007] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 41.007] (II) event0 - Power Button: device is a keyboard
[ 41.007] (II) event0 - Power Button: device removed
[ 41.024] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input0/event0"
[ 41.024] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 41.024] (**) Option "xkb_model" "pc105"
[ 41.024] (**) Option "xkb_layout" "us,ru"
[ 41.024] (**) Option "xkb_variant" ","
[ 41.024] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[ 41.024] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 41.024] (II) event0 - Power Button: device is a keyboard
[ 41.025] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 41.025] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 41.025] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 41.025] (II) Using input driver 'libinput' for 'Sleep Button'
[ 41.025] (**) Sleep Button: always reports core events
[ 41.025] (**) Option "Device" "/dev/input/event1"
[ 41.025] (**) Option "_source" "server/udev"
[ 41.025] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 41.025] (II) event1 - Sleep Button: device is a keyboard
[ 41.025] (II) event1 - Sleep Button: device removed
[ 41.040] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input1/event1"
[ 41.040] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 41.040] (**) Option "xkb_model" "pc105"
[ 41.040] (**) Option "xkb_layout" "us,ru"
[ 41.040] (**) Option "xkb_variant" ","
[ 41.040] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[ 41.040] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 41.040] (II) event1 - Sleep Button: device is a keyboard
[ 41.041] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 41.041] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 41.041] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 41.041] (II) Using input driver 'libinput' for 'Video Bus'
[ 41.041] (**) Video Bus: always reports core events
[ 41.041] (**) Option "Device" "/dev/input/event5"
[ 41.041] (**) Option "_source" "server/udev"
[ 41.041] (II) event5 - Video Bus: is tagged by udev as: Keyboard
[ 41.041] (II) event5 - Video Bus: device is a keyboard
[ 41.041] (II) event5 - Video Bus: device removed
[ 41.056] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:3a/LNXVIDEO:00/input/input7/event5"
[ 41.056] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 9)
[ 41.056] (**) Option "xkb_model" "pc105"
[ 41.056] (**) Option "xkb_layout" "us,ru"
[ 41.056] (**) Option "xkb_variant" ","
[ 41.056] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[ 41.056] (II) event5 - Video Bus: is tagged by udev as: Keyboard
[ 41.056] (II) event5 - Video Bus: device is a keyboard
[ 41.057] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 41.057] (II) No input driver specified, ignoring this device.
[ 41.057] (II) This device may have been added with another device file.
[ 41.057] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event12)
[ 41.057] (II) No input driver specified, ignoring this device.
[ 41.057] (II) This device may have been added with another device file.
[ 41.058] (II) config/udev: Adding input device Lenovo EasyCamera: Lenovo EasyC (/dev/input/event13)
[ 41.058] (**) Lenovo EasyCamera: Lenovo EasyC: Applying InputClass "evdev keyboard catchall"
[ 41.058] (**) Lenovo EasyCamera: Lenovo EasyC: Applying InputClass "libinput keyboard catchall"
[ 41.058] (II) Using input driver 'libinput' for 'Lenovo EasyCamera: Lenovo EasyC'
[ 41.058] (**) Lenovo EasyCamera: Lenovo EasyC: always reports core events
[ 41.058] (**) Option "Device" "/dev/input/event13"
[ 41.058] (**) Option "_source" "server/udev"
[ 41.058] (II) event13 - Lenovo EasyCamera: Lenovo EasyC: is tagged by udev as: Keyboard
[ 41.058] (II) event13 - Lenovo EasyCamera: Lenovo EasyC: device is a keyboard
[ 41.058] (II) event13 - Lenovo EasyCamera: Lenovo EasyC: device removed
[ 41.088] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/input/input14/event13"
[ 41.088] (II) XINPUT: Adding extended input device "Lenovo EasyCamera: Lenovo EasyC" (type: KEYBOARD, id 10)
[ 41.088] (**) Option "xkb_model" "pc105"
[ 41.088] (**) Option "xkb_layout" "us,ru"
[ 41.088] (**) Option "xkb_variant" ","
[ 41.088] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[ 41.088] (II) event13 - Lenovo EasyCamera: Lenovo EasyC: is tagged by udev as: Keyboard
[ 41.088] (II) event13 - Lenovo EasyCamera: Lenovo EasyC: device is a keyboard
[ 41.089] (II) config/udev: Adding input device Kingston HyperX Pulsefire Core (/dev/input/event6)
[ 41.089] (**) Kingston HyperX Pulsefire Core: Applying InputClass "evdev pointer catchall"
[ 41.089] (**) Kingston HyperX Pulsefire Core: Applying InputClass "libinput pointer catchall"
[ 41.089] (II) Using input driver 'libinput' for 'Kingston HyperX Pulsefire Core'
[ 41.089] (**) Kingston HyperX Pulsefire Core: always reports core events
[ 41.089] (**) Option "Device" "/dev/input/event6"
[ 41.089] (**) Option "_source" "server/udev"
[ 41.148] (II) event6 - Kingston HyperX Pulsefire Core: is tagged by udev as: Mouse
[ 41.148] (II) event6 - Kingston HyperX Pulsefire Core: device is a pointer
[ 41.148] (II) event6 - Kingston HyperX Pulsefire Core: device removed
[ 41.196] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/0003:0951:16DE.0001/input/input8/event6"
[ 41.196] (II) XINPUT: Adding extended input device "Kingston HyperX Pulsefire Core" (type: MOUSE, id 11)
[ 41.196] (**) Option "AccelerationScheme" "none"
[ 41.196] (**) Kingston HyperX Pulsefire Core: (accel) selected scheme none/0
[ 41.196] (**) Kingston HyperX Pulsefire Core: (accel) acceleration factor: 2.000
[ 41.196] (**) Kingston HyperX Pulsefire Core: (accel) acceleration threshold: 4
[ 41.256] (II) event6 - Kingston HyperX Pulsefire Core: is tagged by udev as: Mouse
[ 41.256] (II) event6 - Kingston HyperX Pulsefire Core: device is a pointer
[ 41.256] (II) config/udev: Adding input device Kingston HyperX Pulsefire Core (/dev/input/mouse0)
[ 41.256] (II) No input driver specified, ignoring this device.
[ 41.256] (II) This device may have been added with another device file.
[ 41.257] (II) config/udev: Adding input device Kingston HyperX Pulsefire Core (/dev/input/event7)
[ 41.257] (**) Kingston HyperX Pulsefire Core: Applying InputClass "evdev keyboard catchall"
[ 41.257] (**) Kingston HyperX Pulsefire Core: Applying InputClass "libinput keyboard catchall"
[ 41.257] (II) Using input driver 'libinput' for 'Kingston HyperX Pulsefire Core'
[ 41.257] (**) Kingston HyperX Pulsefire Core: always reports core events
[ 41.257] (**) Option "Device" "/dev/input/event7"
[ 41.257] (**) Option "_source" "server/udev"
[ 41.257] (II) event7 - Kingston HyperX Pulsefire Core: is tagged by udev as: Keyboard
[ 41.257] (II) event7 - Kingston HyperX Pulsefire Core: device is a keyboard
[ 41.257] (II) event7 - Kingston HyperX Pulsefire Core: device removed
[ 41.288] (II) libinput: Kingston HyperX Pulsefire Core: needs a virtual subdevice
[ 41.288] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.1/0003:0951:16DE.0002/input/input9/event7"
[ 41.288] (II) XINPUT: Adding extended input device "Kingston HyperX Pulsefire Core" (type: MOUSE, id 12)
[ 41.288] (**) Option "AccelerationScheme" "none"
[ 41.288] (**) Kingston HyperX Pulsefire Core: (accel) selected scheme none/0
[ 41.288] (**) Kingston HyperX Pulsefire Core: (accel) acceleration factor: 2.000
[ 41.288] (**) Kingston HyperX Pulsefire Core: (accel) acceleration threshold: 4
[ 41.288] (II) event7 - Kingston HyperX Pulsefire Core: is tagged by udev as: Keyboard
[ 41.288] (II) event7 - Kingston HyperX Pulsefire Core: device is a keyboard
[ 41.289] (II) config/udev: Adding input device UVC Camera (046d:0807) (/dev/input/event14)
[ 41.289] (**) UVC Camera (046d:0807): Applying InputClass "evdev keyboard catchall"
[ 41.289] (**) UVC Camera (046d:0807): Applying InputClass "libinput keyboard catchall"
[ 41.289] (II) Using input driver 'libinput' for 'UVC Camera (046d:0807)'
[ 41.289] (**) UVC Camera (046d:0807): always reports core events
[ 41.289] (**) Option "Device" "/dev/input/event14"
[ 41.289] (**) Option "_source" "server/udev"
[ 41.289] (II) event14 - UVC Camera (046d:0807): is tagged by udev as: Keyboard
[ 41.289] (II) event14 - UVC Camera (046d:0807): device is a keyboard
[ 41.289] (II) event14 - UVC Camera (046d:0807): device removed
[ 41.324] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input15/event14"
[ 41.324] (II) XINPUT: Adding extended input device "UVC Camera (046d:0807)" (type: KEYBOARD, id 13)
[ 41.324] (**) Option "xkb_model" "pc105"
[ 41.324] (**) Option "xkb_layout" "us,ru"
[ 41.324] (**) Option "xkb_variant" ","
[ 41.324] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[ 41.324] (II) event14 - UVC Camera (046d:0807): is tagged by udev as: Keyboard
[ 41.324] (II) event14 - UVC Camera (046d:0807): device is a keyboard
[ 41.325] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event10)
[ 41.325] (II) No input driver specified, ignoring this device.
[ 41.325] (II) This device may have been added with another device file.
[ 41.325] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
[ 41.325] (II) No input driver specified, ignoring this device.
[ 41.325] (II) This device may have been added with another device file.
[ 41.325] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event9)
[ 41.325] (**) Ideapad extra buttons: Applying InputClass "evdev keyboard catchall"
[ 41.325] (**) Ideapad extra buttons: Applying InputClass "libinput keyboard catchall"
[ 41.325] (II) Using input driver 'libinput' for 'Ideapad extra buttons'
[ 41.325] (**) Ideapad extra buttons: always reports core events
[ 41.325] (**) Option "Device" "/dev/input/event9"
[ 41.325] (**) Option "_source" "server/udev"
[ 41.326] (II) event9 - Ideapad extra buttons: is tagged by udev as: Keyboard
[ 41.326] (II) event9 - Ideapad extra buttons: device is a keyboard
[ 41.326] (II) event9 - Ideapad extra buttons: device removed
[ 41.340] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input10/event9"
[ 41.340] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 14)
[ 41.340] (**) Option "xkb_model" "pc105"
[ 41.340] (**) Option "xkb_layout" "us,ru"
[ 41.340] (**) Option "xkb_variant" ","
[ 41.340] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[ 41.340] (II) event9 - Ideapad extra buttons: is tagged by udev as: Keyboard
[ 41.340] (II) event9 - Ideapad extra buttons: device is a keyboard
[ 41.341] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 41.341] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 41.341] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 41.341] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 41.341] (**) AT Translated Set 2 keyboard: always reports core events
[ 41.341] (**) Option "Device" "/dev/input/event4"
[ 41.341] (**) Option "_source" "server/udev"
[ 41.341] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 41.341] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 41.341] (II) event4 - AT Translated Set 2 keyboard: device removed
[ 41.360] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 41.360] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 15)
[ 41.360] (**) Option "xkb_model" "pc105"
[ 41.360] (**) Option "xkb_layout" "us,ru"
[ 41.360] (**) Option "xkb_variant" ","
[ 41.360] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[ 41.360] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 41.360] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 41.361] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event8)
[ 41.361] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 41.361] (**) ETPS/2 Elantech Touchpad: Applying InputClass "libinput touchpad catchall"
[ 41.361] (II) Using input driver 'libinput' for 'ETPS/2 Elantech Touchpad'
[ 41.361] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 41.361] (**) Option "Device" "/dev/input/event8"
[ 41.361] (**) Option "_source" "server/udev"
[ 41.361] (II) event8 - ETPS/2 Elantech Touchpad: is tagged by udev as: Touchpad
[ 41.361] (II) event8 - ETPS/2 Elantech Touchpad: device is a touchpad
[ 41.361] (II) event8 - ETPS/2 Elantech Touchpad: device removed
[ 41.400] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event8"
[ 41.400] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 16)
[ 41.400] (**) Option "AccelerationScheme" "none"
[ 41.400] (**) ETPS/2 Elantech Touchpad: (accel) selected scheme none/0
[ 41.400] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 41.400] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 41.400] (II) event8 - ETPS/2 Elantech Touchpad: is tagged by udev as: Touchpad
[ 41.400] (II) event8 - ETPS/2 Elantech Touchpad: device is a touchpad
[ 41.401] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[ 41.401] (II) No input driver specified, ignoring this device.
[ 41.401] (II) This device may have been added with another device file.
[ 41.406] (**) Kingston HyperX Pulsefire Core: Applying InputClass "evdev keyboard catchall"
[ 41.406] (**) Kingston HyperX Pulsefire Core: Applying InputClass "libinput keyboard catchall"
[ 41.406] (II) Using input driver 'libinput' for 'Kingston HyperX Pulsefire Core'
[ 41.406] (**) Kingston HyperX Pulsefire Core: always reports core events
[ 41.406] (**) Option "Device" "/dev/input/event7"
[ 41.406] (**) Option "_source" "_driver/libinput"
[ 41.406] (II) libinput: Kingston HyperX Pulsefire Core: is a virtual subdevice
[ 41.406] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.1/0003:0951:16DE.0002/input/input9/event7"
[ 41.406] (II) XINPUT: Adding extended input device "Kingston HyperX Pulsefire Core" (type: KEYBOARD, id 17)
[ 41.406] (**) Option "xkb_model" "pc105"
[ 41.406] (**) Option "xkb_layout" "us,ru"
[ 41.406] (**) Option "xkb_variant" ","
[ 41.406] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[ 43.558] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 43.558] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 43.558] (--) NVIDIA(GPU-0):
[ 43.559] (--) NVIDIA(GPU-0): LGD (DFP-0): connected
[ 43.559] (--) NVIDIA(GPU-0): LGD (DFP-0): Internal LVDS
[ 43.559] (--) NVIDIA(GPU-0): LGD (DFP-0): 330.0 MHz maximum pixel clock
[ 43.559] (--) NVIDIA(GPU-0):
[ 43.559] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 43.559] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 43.559] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 43.559] (--) NVIDIA(GPU-0):
[ 43.828] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 43.828] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 43.828] (--) NVIDIA(GPU-0):
[ 43.828] (--) NVIDIA(GPU-0): LGD (DFP-0): connected
[ 43.828] (--) NVIDIA(GPU-0): LGD (DFP-0): Internal LVDS
[ 43.828] (--) NVIDIA(GPU-0): LGD (DFP-0): 330.0 MHz maximum pixel clock
[ 43.828] (--) NVIDIA(GPU-0):
[ 43.828] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 43.828] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 43.828] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 43.828] (--) NVIDIA(GPU-0):
[ 10136.082] (II) config/udev: removing device UVC Camera (046d:0807)
[ 10136.082] (II) event14 - UVC Camera (046d:0807): device removed
[ 10136.105] (II) UnloadModule: "libinput"
[ 10137.785] (II) config/udev: Adding input device UVC Camera (046d:0807) (/dev/input/event14)
[ 10137.785] (**) UVC Camera (046d:0807): Applying InputClass "evdev keyboard catchall"
[ 10137.785] (**) UVC Camera (046d:0807): Applying InputClass "libinput keyboard catchall"
[ 10137.785] (II) Using input driver 'libinput' for 'UVC Camera (046d:0807)'
[ 10137.785] (**) UVC Camera (046d:0807): always reports core events
[ 10137.785] (**) Option "Device" "/dev/input/event14"
[ 10137.785] (**) Option "_source" "server/udev"
[ 10137.787] (II) event14 - UVC Camera (046d:0807): is tagged by udev as: Keyboard
[ 10137.787] (II) event14 - UVC Camera (046d:0807): device is a keyboard
[ 10137.787] (II) event14 - UVC Camera (046d:0807): device removed
[ 10137.816] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input16/event14"
[ 10137.816] (II) XINPUT: Adding extended input device "UVC Camera (046d:0807)" (type: KEYBOARD, id 13)
[ 10137.816] (**) Option "xkb_model" "pc105"
[ 10137.816] (**) Option "xkb_layout" "us,ru"
[ 10137.816] (**) Option "xkb_variant" ","
[ 10137.816] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[ 10137.818] (II) event14 - UVC Camera (046d:0807): is tagged by udev as: Keyboard
[ 10137.818] (II) event14 - UVC Camera (046d:0807): device is a keyboard
[ 10137.868] (II) config/udev: removing device UVC Camera (046d:0807)
[ 10137.868] (II) event14 - UVC Camera (046d:0807): device removed
[ 10137.893] (II) UnloadModule: "libinput"
[ 10150.039] (II) config/udev: removing device Kingston HyperX Pulsefire Core
[ 10150.039] (II) event6 - Kingston HyperX Pulsefire Core: device removed
[ 10150.064] (II) UnloadModule: "libinput"
[ 10150.097] (II) config/udev: removing device Kingston HyperX Pulsefire Core
[ 10150.099] (II) UnloadModule: "libinput"
[ 10150.099] (II) config/udev: removing device Kingston HyperX Pulsefire Core
[ 10150.099] (II) event7 - Kingston HyperX Pulsefire Core: device removed
[ 10150.117] (II) UnloadModule: "libinput"
[ 10485.040] (II) config/udev: Adding input device Kingston HyperX Pulsefire Core (/dev/input/mouse0)
[ 10485.040] (II) No input driver specified, ignoring this device.
[ 10485.040] (II) This device may have been added with another device file.
[ 10485.060] (II) config/udev: Adding input device Kingston HyperX Pulsefire Core (/dev/input/event7)
[ 10485.060] (**) Kingston HyperX Pulsefire Core: Applying InputClass "evdev keyboard catchall"
[ 10485.060] (**) Kingston HyperX Pulsefire Core: Applying InputClass "libinput keyboard catchall"
[ 10485.060] (II) Using input driver 'libinput' for 'Kingston HyperX Pulsefire Core'
[ 10485.060] (**) Kingston HyperX Pulsefire Core: always reports core events
[ 10485.060] (**) Option "Device" "/dev/input/event7"
[ 10485.060] (**) Option "_source" "server/udev"
[ 10485.061] (II) event7 - Kingston HyperX Pulsefire Core: is tagged by udev as: Keyboard
[ 10485.061] (II) event7 - Kingston HyperX Pulsefire Core: device is a keyboard
[ 10485.061] (II) event7 - Kingston HyperX Pulsefire Core: device removed
[ 10485.072] (II) libinput: Kingston HyperX Pulsefire Core: needs a virtual subdevice
[ 10485.072] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.1/0003:0951:16DE.0005/input/input18/event7"
[ 10485.072] (II) XINPUT: Adding extended input device "Kingston HyperX Pulsefire Core" (type: MOUSE, id 11)
[ 10485.072] (**) Option "AccelerationScheme" "none"
[ 10485.073] (**) Kingston HyperX Pulsefire Core: (accel) selected scheme none/0
[ 10485.073] (**) Kingston HyperX Pulsefire Core: (accel) acceleration factor: 2.000
[ 10485.073] (**) Kingston HyperX Pulsefire Core: (accel) acceleration threshold: 4
[ 10485.073] (II) event7 - Kingston HyperX Pulsefire Core: is tagged by udev as: Keyboard
[ 10485.073] (II) event7 - Kingston HyperX Pulsefire Core: device is a keyboard
[ 10485.074] (**) Kingston HyperX Pulsefire Core: Applying InputClass "evdev keyboard catchall"
[ 10485.074] (**) Kingston HyperX Pulsefire Core: Applying InputClass "libinput keyboard catchall"
[ 10485.074] (II) Using input driver 'libinput' for 'Kingston HyperX Pulsefire Core'
[ 10485.074] (**) Kingston HyperX Pulsefire Core: always reports core events
[ 10485.074] (**) Option "Device" "/dev/input/event7"
[ 10485.074] (**) Option "_source" "_driver/libinput"
[ 10485.074] (II) libinput: Kingston HyperX Pulsefire Core: is a virtual subdevice
[ 10485.074] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.1/0003:0951:16DE.0005/input/input18/event7"
[ 10485.074] (II) XINPUT: Adding extended input device "Kingston HyperX Pulsefire Core" (type: KEYBOARD, id 12)
[ 10485.074] (**) Option "xkb_model" "pc105"
[ 10485.074] (**) Option "xkb_layout" "us,ru"
[ 10485.074] (**) Option "xkb_variant" ","
[ 10485.074] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[ 10485.140] (II) config/udev: Adding input device Kingston HyperX Pulsefire Core (/dev/input/event6)
[ 10485.140] (**) Kingston HyperX Pulsefire Core: Applying InputClass "evdev pointer catchall"
[ 10485.140] (**) Kingston HyperX Pulsefire Core: Applying InputClass "libinput pointer catchall"
[ 10485.140] (II) Using input driver 'libinput' for 'Kingston HyperX Pulsefire Core'
[ 10485.140] (**) Kingston HyperX Pulsefire Core: always reports core events
[ 10485.140] (**) Option "Device" "/dev/input/event6"
[ 10485.140] (**) Option "_source" "server/udev"
[ 10485.200] (II) event6 - Kingston HyperX Pulsefire Core: is tagged by udev as: Mouse
[ 10485.200] (II) event6 - Kingston HyperX Pulsefire Core: device is a pointer
[ 10485.200] (II) event6 - Kingston HyperX Pulsefire Core: device removed
[ 10485.236] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/0003:0951:16DE.0004/input/input17/event6"
[ 10485.236] (II) XINPUT: Adding extended input device "Kingston HyperX Pulsefire Core" (type: MOUSE, id 13)
[ 10485.239] (**) Option "AccelerationScheme" "none"
[ 10485.242] (**) Kingston HyperX Pulsefire Core: (accel) selected scheme none/0
[ 10485.242] (**) Kingston HyperX Pulsefire Core: (accel) acceleration factor: 2.000
[ 10485.242] (**) Kingston HyperX Pulsefire Core: (accel) acceleration threshold: 4
[ 10485.300] (II) event6 - Kingston HyperX Pulsefire Core: is tagged by udev as: Mouse
[ 10485.300] (II) event6 - Kingston HyperX Pulsefire Core: device is a pointer
[ 10699.359] (II) config/udev: Adding input device UVC Camera (046d:0807) (/dev/input/event14)
[ 10699.360] (**) UVC Camera (046d:0807): Applying InputClass "evdev keyboard catchall"
[ 10699.360] (**) UVC Camera (046d:0807): Applying InputClass "libinput keyboard catchall"
[ 10699.360] (II) Using input driver 'libinput' for 'UVC Camera (046d:0807)'
[ 10699.360] (**) UVC Camera (046d:0807): always reports core events
[ 10699.360] (**) Option "Device" "/dev/input/event14"
[ 10699.360] (**) Option "_source" "server/udev"
[ 10699.360] (II) event14 - UVC Camera (046d:0807): is tagged by udev as: Keyboard
[ 10699.360] (II) event14 - UVC Camera (046d:0807): device is a keyboard
[ 10699.360] (II) event14 - UVC Camera (046d:0807): device removed
[ 10699.408] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input19/event14"
[ 10699.408] (II) XINPUT: Adding extended input device "UVC Camera (046d:0807)" (type: KEYBOARD, id 17)
[ 10699.408] (**) Option "xkb_model" "pc105"
[ 10699.408] (**) Option "xkb_layout" "us,ru"
[ 10699.408] (**) Option "xkb_variant" ","
[ 10699.408] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[ 10699.409] (II) event14 - UVC Camera (046d:0807): is tagged by udev as: Keyboard
[ 10699.409] (II) event14 - UVC Camera (046d:0807): device is a keyboard

Аватара пользователя

slant
Сообщения: 2074
Зарегистрирован: 21 июн 2017, 15:09
Решено: 35
Благодарил (а): 18 раз
Поблагодарили: 890 раз

Ошибка при изменении гц

Сообщение slant » 01 дек 2019, 13:13

Ладно, допускаю что некий шанс на такой режим все-же присутствует. Если только это не был внешний подключенный монитор тогда. Опять же, матрицу ноутбука не так просто проверить на текущую частоту - это у внешнего монитора в меню часто есть режим информации о сигнале. А у матрицы - приходится верить тому, что драйвер говорит. А он и врать может...

Давайте еще вот этот вывод посмотрим: xrandr --verbose. Если матрица умеет в высокие частоты - это должно отразится хотя-бы на низких разрешениях вроде 1024х800. Там высокие частоты исторически были у CRT мониторов, так что детект должен пройти. Или хотя бы увидим что оно вообще EDID не использует для детекта....


Автор темы
Jexly
Сообщения: 9
Зарегистрирован: 30 ноя 2019, 16:26

Ошибка при изменении гц

Сообщение Jexly » 01 дек 2019, 13:14

Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 16384 x 16384
VGA-0 disconnected (normal left inverted right x axis y axis)
Identifier: 0x27e
Timestamp: 43707
Subpixel: unknown
Clones:
CRTCs: 0 1 2 3
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
CscMatrix: 65536 0 0 0 0 65536 0 0 0 0 65536 0
BorderDimensions: 4
supported: 4
Border: 0 0 0 0
range: (0, 65535)
SignalFormat: VGA
supported: VGA
ConnectorType: VGA
ConnectorNumber: 4
_ConnectorLocation: 4
LVDS-0 connected primary 1920x1080+0+0 (0x280) normal (normal left inverted right x axis y axis) 345mm x 194mm
Identifier: 0x27f
Timestamp: 43707
Subpixel: unknown
Gamma: 1.0:1.0:1.0
Brightness: 1.0
Clones:
CRTC: 0
CRTCs: 0 1 2 3
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
_MUTTER_PRESENTATION_OUTPUT: 0
CscMatrix: 65536 0 0 0 0 65536 0 0 0 0 65536 0
Backlight: 100
range: (0, 100)
EDID:
00ffffffffffff0030e4e90100000000
00130103802313780a08d59f5a509625
1e505400000001010101010101010101
0101010101011a3680a070381f403020
350059c2100000190000000000000000
00000000000000000000000000fe004c
4720446973706c61790a2020000000fe
004c503135365746312d544c433100b0
BorderDimensions: 4
supported: 4
Border: 0 0 0 0
range: (0, 65535)
SignalFormat: LVDS
supported: LVDS
ConnectorType: Panel
ConnectorNumber: 0
_ConnectorLocation: 0
1920x1080 (0x280) 138.500MHz -HSync -VSync *current +preferred
h: width 1920 start 1968 end 2000 total 2080 skew 0 clock 66.59KHz
v: height 1080 start 1083 end 1088 total 1111 clock 59.93Hz
HDMI-0 disconnected (normal left inverted right x axis y axis)
Identifier: 0x281
Timestamp: 43707
Subpixel: unknown
Clones:
CRTCs: 0 1 2 3
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
CscMatrix: 65536 0 0 0 0 65536 0 0 0 0 65536 0
BorderDimensions: 4
supported: 4
Border: 0 0 0 0
range: (0, 65535)
SignalFormat: TMDS
supported: TMDS
ConnectorType: HDMI
ConnectorNumber: 1
_ConnectorLocation: 1


Автор темы
Jexly
Сообщения: 9
Зарегистрирован: 30 ноя 2019, 16:26

Ошибка при изменении гц

Сообщение Jexly » 01 дек 2019, 13:16

Я специально для Вас могу установить винду, записать видео как у меня успешно выставляется 120гц и скинуть его Вам

Аватара пользователя

rogoznik
Сообщения: 6057
Зарегистрирован: 27 июн 2017, 10:36
Решено: 66
Откуда: Нижний Тагил
Благодарил (а): 325 раз
Поблагодарили: 1104 раза

Ошибка при изменении гц

Сообщение rogoznik » 01 дек 2019, 13:19

Jexly писал(а):
01 дек 2019, 13:16
могу установить винду, записать видео как у меня успешно выставляется 120гц и скинуть его
Хотелось бы посмотреть. Режима 120 гц нет в описании ни одной из модификаций этого ноута. Так же об этом режиме не упоминается ни в одном из найденных тестирований.
ИзображениеИзображение


Автор темы
Jexly
Сообщения: 9
Зарегистрирован: 30 ноя 2019, 16:26

Ошибка при изменении гц

Сообщение Jexly » 01 дек 2019, 13:21

Хорошо, я тогда ориентировочно установлю завтра, максимум во вторник. Видео залью на ютуб

Аватара пользователя

slant
Сообщения: 2074
Зарегистрирован: 21 июн 2017, 15:09
Решено: 35
Благодарил (а): 18 раз
Поблагодарили: 890 раз

Ошибка при изменении гц

Сообщение slant » 01 дек 2019, 15:50

Судя по тому что записано в EDID - матрица поддерживает исключительно 60Hz. Это не зависит ни от драйвера, ни от чего другого. Это то, что производитель вложил в свое железо.
Так что если на винде драйвер показывал 120Hz - он откровенно врал вам в лицо. Эта матрица физически не умеет такой вертикальной частоты. Возможно имело место нечто вроде апскейла - видеокарта выдает два импульса, матрица делает одно обновление. (120/2 = 60, что как раз и может матрица.)

Вернуться в «Cinnamon»