administrator@1C-Server ~ $ inxi -Fxz
System: Host: 1C-Server Kernel: 4.10.0-38-generic x86_64 (64 bit gcc: 5.4.0)
Desktop: MATE 1.18.0 (Gtk 3.18.9-1ubuntu3.3)
Distro: Linux Mint 18.3 Sylvia
Machine: Mobo: Gigabyte model: P85-D3 v: x.x
Bios: American Megatrends v: FD date: 08/18/2014
CPU: Quad core Intel Core i7-4790 (-HT-MCP-) cache: 8192 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 28734
clock speeds: max: 4000 MHz 1: 2524 MHz 2: 3544 MHz 3: 2590 MHz
4: 2858 MHz 5: 2502 MHz 6: 2519 MHz 7: 3967 MHz 8: 3006 MHz
Graphics: Card: Intel Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller
bus-ID: 00:02.0
Display Server: X.Org 1.18.4 drivers: intel (unloaded: fbdev,vesa)
Resolution: 1680x1050@59.95hz
GLX Renderer: Mesa DRI Intel Haswell Desktop
GLX Version: 3.0 Mesa 17.0.7 Direct Rendering: Yes
Audio: Card-1 Intel 8 Series/C220 Series High Definition Audio Controller
driver: snd_hda_intel bus-ID: 00:1b.0
Card-2 Intel Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller
driver: snd_hda_intel bus-ID: 00:03.0
Sound: Advanced Linux Sound Architecture v: k4.10.0-38-generic
Network: Card: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
driver: r8169 v: 2.3LK-NAPI port: e000 bus-ID: 02:00.0
IF: enp2s0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives: HDD Total Size: 755.7GB (8.4% used)
ID-1: /dev/sda model: KINGSTON_SH103S3 size: 240.1GB temp: 25C
ID-2: /dev/sdb model: WDC_WD2500AAJS size: 250.1GB temp: 43C
ID-3: /dev/sdc model: WDC_WD2500AAJS size: 250.1GB temp: 44C
ID-4: USB /dev/sdd model: SanDisk_Ultra size: 15.5GB temp: 0C
Partition: ID-1: / size: 204G used: 41G (21%) fs: ext4 dev: /dev/sda2
ID-2: swap-1 size: 17.04GB used: 0.00GB (0%) fs: swap dev: /dev/sda3
RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors: System Temperatures: cpu: 29.8C mobo: 27.8C
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 233 Uptime: 39 min Memory: 1299.6/15916.1MB
Init: systemd runlevel: 5 Gcc sys: 5.4.0
Client: Shell (bash 4.3.481) inxi: 2.2.35
System: Host: 1C-Server Kernel: 4.10.0-38-generic x86_64 (64 bit gcc: 5.4.0)
Desktop: MATE 1.18.0 (Gtk 3.18.9-1ubuntu3.3)
Distro: Linux Mint 18.3 Sylvia
Machine: Mobo: Gigabyte model: P85-D3 v: x.x
Bios: American Megatrends v: FD date: 08/18/2014
CPU: Quad core Intel Core i7-4790 (-HT-MCP-) cache: 8192 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 28734
clock speeds: max: 4000 MHz 1: 2524 MHz 2: 3544 MHz 3: 2590 MHz
4: 2858 MHz 5: 2502 MHz 6: 2519 MHz 7: 3967 MHz 8: 3006 MHz
Graphics: Card: Intel Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller
bus-ID: 00:02.0
Display Server: X.Org 1.18.4 drivers: intel (unloaded: fbdev,vesa)
Resolution: 1680x1050@59.95hz
GLX Renderer: Mesa DRI Intel Haswell Desktop
GLX Version: 3.0 Mesa 17.0.7 Direct Rendering: Yes
Audio: Card-1 Intel 8 Series/C220 Series High Definition Audio Controller
driver: snd_hda_intel bus-ID: 00:1b.0
Card-2 Intel Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller
driver: snd_hda_intel bus-ID: 00:03.0
Sound: Advanced Linux Sound Architecture v: k4.10.0-38-generic
Network: Card: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
driver: r8169 v: 2.3LK-NAPI port: e000 bus-ID: 02:00.0
IF: enp2s0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives: HDD Total Size: 755.7GB (8.4% used)
ID-1: /dev/sda model: KINGSTON_SH103S3 size: 240.1GB temp: 25C
ID-2: /dev/sdb model: WDC_WD2500AAJS size: 250.1GB temp: 43C
ID-3: /dev/sdc model: WDC_WD2500AAJS size: 250.1GB temp: 44C
ID-4: USB /dev/sdd model: SanDisk_Ultra size: 15.5GB temp: 0C
Partition: ID-1: / size: 204G used: 41G (21%) fs: ext4 dev: /dev/sda2
ID-2: swap-1 size: 17.04GB used: 0.00GB (0%) fs: swap dev: /dev/sda3
RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors: System Temperatures: cpu: 29.8C mobo: 27.8C
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 233 Uptime: 39 min Memory: 1299.6/15916.1MB
Init: systemd runlevel: 5 Gcc sys: 5.4.0
Client: Shell (bash 4.3.481) inxi: 2.2.35
Код: Выделить всё
administrator@1C-Server ~ $ sudo useradd -D
sudo пароль для administrator:
administrator@1C-Server ~ $ useradd -D
administrator@1C-Server ~ $ sudo useradd -m db2fenc1
administrator@1C-Server ~ $
Но при попытке поставить ssh выскакивает такая ошибка.
Код: Выделить всё
При обработке следующих пакетов произошли ошибки:
openssh-server
E: Sub-process /usr/bin/dpkg returned an error code (1)
Ошибка при установке пакета. Попытка восстановления:
Настраивается пакет openssh-server (1:7.2p2-4ubuntu2.2) …
adduser: Работа «/usr/sbin/useradd -d /var/run/sshd -g nogroup -s /usr/sbin/nologin -u 123 sshd» завершилась с кодом ошибки 1. Завершение работы.
Код: Выделить всё
administrator@1C-Server /etc $ ls -al
итого 1360
...
drwxr-xr-x 2 root root 4096 ноя 24 17:25 groff
-rw-rw-rw- 1 root root 1128 янв 9 23:58 group
-rw------- 1 root root 1091 янв 2 13:42 group-
drwxr-xr-x 2 root root 4096 ноя 24 17:31 grub.d
-rw-r----- 1 root shadow 949 янв 9 23:51 gshadow
-rw------- 1 root root 921 янв 2 13:42 gshadow-
drwxr-xr-x 3 root root 4096 ноя 24 17:06 gss
...
-rw-r--r-- 1 root root 3 янв 2 13:25 papersize
-rw-r--r-- 1 root root 2505 янв 10 00:05 passwd
-rw-r--r-- 1 root root 2506 янв 9 23:58 passwd-
drwxr-xr-x 2 root root 4096 ноя 24 17:26 pcmcia
...
drwxr-xr-x 4 root root 4096 ноя 24 17:31 sgml
-rw-r----- 1 root shadow 1459 янв 9 23:50 shadow
-rw------- 1 root root 1332 янв 9 22:53 shadow-
-rw-r--r-- 1 root root 96 янв 9 13:06 shells
...
administrator@1C-Server /etc $
До этого ставил 1с и апач всё прошло нормально. После этого пошли проблемы не смог поставить ssh, но решил забить на него. А тут начал ставить IBM DB2 и такая засада.
