Не сохраняются настройки экрана

Руководства, вопросы, обсуждения
Правила форума
Как правильно задавать вопросы Правильно сформулированный вопрос и его грамотное оформление способствует высокой вероятности получения достаточно содержательного и по существу ответа. Общая рекомендация по составлению тем: 1. Версия ОС вместе с разрядностью. Пример: LM 18.1 x64, LM Sarah x32 2. DE. Если вопрос касается двух, то через запятую. (xfce, KDE, cinnamon, mate) 3. Какое железо. (достаточно вывод inxi -Fxz в спойлере (как пользоваться спойлером смотрим здесь)) или же дать ссылку на hw-probe 4. Суть. Желательно с выводом консоли, логами. 5. Скрин. Просьба указывать 1, 2 и 3 независимо от того, имеет ли это отношение к вопросу или нет. Так же не забываем об общих правилах Как пример вот

Автор темы
mr.v
Сообщения: 14
Зарегистрирован: 23 авг 2017, 16:55
Решено: 1

Не сохраняются настройки экрана

Сообщение mr.v » 23 авг 2017, 17:03

Добрый день, подскажите пожалуйста. У меня подключен монитор и телевизор. После установки с нуля системы было в неправильном порядке экраны и не то резрешение на телевизоре. Поменял в NVIDIA X Server всё как надо, но после перезагрузки это не сохраняется.
Mint 18.2 cinnamon.
На 18.1 и на Ubuntu с такой проблемой никогда не сталкивался.

Решение mr.v » 24 авг 2017, 14:18
Сделал в общем.

Код: Выделить всё

xrandr --output DVI-I-2 --primary
xrandr --output DVI-I-1 --mode 1360x768 --right-of DVI-I-2
Это в автозагрузку. Только экраны гаснут на несколько секунд при загрузке, но это мелочи. Нафиг я столько парился этими конфигами?? хД

Перейти к ответу ➙

Аватара пользователя

Chocobo
Сообщения: 5979
Зарегистрирован: 27 авг 2016, 19:57
Решено: 136
Откуда: НН
Благодарил (а): 425 раз
Поблагодарили: 1550 раз

Не сохраняются настройки экрана

Сообщение Chocobo » 23 авг 2017, 17:13

Нет невидий сейчас под рукой, но по памяти предположу, что не сохранил может текущую конфигурацию.


Автор темы
mr.v
Сообщения: 14
Зарегистрирован: 23 авг 2017, 16:55
Решено: 1

Не сохраняются настройки экрана

Сообщение mr.v » 23 авг 2017, 17:29

Сохранял... сто раз нажимал туда. Возможно, я что-то не туда сохраняю, но такой путь был по умолчанию.
У вас нет необходимых прав для просмотра вложений в этом сообщении.

Аватара пользователя

Chocobo
Сообщения: 5979
Зарегистрирован: 27 авг 2016, 19:57
Решено: 136
Откуда: НН
Благодарил (а): 425 раз
Поблагодарили: 1550 раз

Не сохраняются настройки экрана

Сообщение Chocobo » 23 авг 2017, 17:34

mr.v, покажи сюда содержимое этого файла, что там насохранялось сравним со скрином


Автор темы
mr.v
Сообщения: 14
Зарегистрирован: 23 авг 2017, 16:55
Решено: 1

Не сохраняются настройки экрана

Сообщение mr.v » 23 авг 2017, 17:37

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 361.42 (buildd@lgw01-18) Tue Apr 5 14:33:28 UTC 2016


Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection

Section "Files"
EndSection

Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection

Section "InputDevice"

# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection

Section "Monitor"

# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "BenQ GW2760HS"
HorizSync 30.0 - 83.0
VertRefresh 50.0 - 76.0
Option "DPMS"
EndSection

Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 9600 GT"
EndSection

Section "Screen"

# Removed Option "metamodes" "DVI-I-2: 1920x1080 +0+0, DVI-I-1: 1360x768 +1920+0"
# Removed Option "metamodes" "DVI-I-2: nvidia-auto-select +0+0, DVI-I-1: 1360x768 +1920+0"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "Stereo" "0"
Option "nvidiaXineramaInfoOrder" "DFP-0"
Option "metamodes" "DVI-I-2: 1920x1080 +0+0, DVI-I-1: 1360x768 +1920+0"
Option "SLI" "Off"
Option "MultiGPU" "Off"
Option "BaseMosaic" "off"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Вроде все нормально, как и должно быть, но он его похоже не подгружает или еще что.

Аватара пользователя

slant
Сообщения: 393
Зарегистрирован: 21 июн 2017, 15:09
Решено: 5
Поблагодарили: 154 раза

Не сохраняются настройки экрана

Сообщение slant » 23 авг 2017, 18:22

Причина в том, что оно хочет писать по умолчанию туда, куда может писать только root. А запускается с правами обычного пользователя и соответственно обламывается.


Автор темы
mr.v
Сообщения: 14
Зарегистрирован: 23 авг 2017, 16:55
Решено: 1

Не сохраняются настройки экрана

Сообщение mr.v » 23 авг 2017, 18:28

Причина в том, что оно хочет писать по умолчанию туда, куда может писать только root. А запускается с правами обычного пользователя и соответственно обламывается.
В смысле? В этом файле, который находится да, куда может писать только рут, все изменения появляются сразу после того как нажмешь кнопку сохранить настройки, специально перепроверил. Соответственно рут есть у xserverara. Да и суть в том что он их не считывает при загрузке... в этом проблема, а записывает то нормально. Ну как я понял.

Аватара пользователя

Unborn
Сообщения: 859
Зарегистрирован: 03 сен 2016, 10:36
Решено: 15
Благодарил (а): 2 раза
Поблагодарили: 129 раз

Не сохраняются настройки экрана

Сообщение Unborn » 23 авг 2017, 18:38

mr.v писал(а): Вроде все нормально, как и должно быть, но он его похоже не подгружает или еще что.
Настройки должны быть либо в /etc/X11/xorg.conf.d/20-nvidia.conf, либо в /usr/share/X11/xorg.conf.d/20-nvidia.conf
или xorg.conf. Перенеси настройки и проверь.
По умолчанию всё в юзеровской шаре. В /etc общесистемные конфиги, что-то типа Виндозной загрузки в Безопасном режиме.


Автор темы
mr.v
Сообщения: 14
Зарегистрирован: 23 авг 2017, 16:55
Решено: 1

Не сохраняются настройки экрана

Сообщение mr.v » 23 авг 2017, 18:52

Настройки должны быть либо в /etc/X11/xorg.conf.d/20-nvidia.conf, либо в /usr/share/X11/xorg.conf.d/20-nvidia.conf
или xorg.conf. Перенеси настройки и проверь.
По умолчанию всё в юзеровской шаре. В /etc общесистемные конфиги, что-то типа Виндозной загрузки в Безопасном режиме.
Не там не там этих файлов не было, скопировал и туда и туда и с тем и с тем названием - всё тоже самое... не работает :(


Автор темы
mr.v
Сообщения: 14
Зарегистрирован: 23 авг 2017, 16:55
Решено: 1

Не сохраняются настройки экрана

Сообщение mr.v » 23 авг 2017, 19:13

Перерыл весь гугл уже. много где пишут, что конфиг как раз таки должен находится тут /etc/X11/xorg.conf. Хотя не везде. И все такие проблемы похожие решаются как раз его редактированием, но тут вообще какой-то похоже глюк, так не хочется переустанавливать. Еще раз повторюсь на 18.1 не было такой проблемы, насколько я помню я один раз сохранил куда предлагал и всё забыл об этом, всё работало. А тут ерунда какая-то... тут ниже есть топик что у человека яркость экрана тоже не сохранялась, может это похожее что-то.

Аватара пользователя

Chocobo
Сообщения: 5979
Зарегистрирован: 27 авг 2016, 19:57
Решено: 136
Откуда: НН
Благодарил (а): 425 раз
Поблагодарили: 1550 раз

Не сохраняются настройки экрана

Сообщение Chocobo » 23 авг 2017, 19:15

покажи тогда и /var/log/Xorg.0.log
Может там что прояснится


Автор темы
mr.v
Сообщения: 14
Зарегистрирован: 23 авг 2017, 16:55
Решено: 1

Не сохраняются настройки экрана

Сообщение mr.v » 23 авг 2017, 19:24

покажи тогда и /var/log/Xorg.0.log
Может там что прояснится
[ 8.527]
X.Org X Server 1.18.4
Release Date: 2016-07-19
[ 8.530] X Protocol Version 11, Revision 0
[ 8.530] Build Operating System: Linux 4.4.0-83-generic x86_64 Ubuntu
[ 8.530] Current Operating System: Linux mdma-GA-MA770T-UD3P 4.10.0-32-generic #36~16.04.1-Ubuntu SMP Wed Aug 9 09:19:02 UTC 2017 x86_64
[ 8.530] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.10.0-32-generic root=UUID=7c86bfa7-5edd-44db-ba0d-782f54fc6495 ro quiet splash
[ 8.530] Build Date: 17 July 2017 05:05:12PM
[ 8.530] xorg-server 2:1.18.4-0ubuntu0.3 (For technical support please see http://www.ubuntu.com/support)
[ 8.530] Current version of pixman: 0.33.6
[ 8.530] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 8.530] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 8.530] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Aug 23 21:49:01 2017
[ 8.531] (==) Using config file: "/etc/X11/xorg.conf"
[ 8.531] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 8.536] (==) ServerLayout "Layout0"
[ 8.536] (**) |-->Screen "Screen0" (0)
[ 8.536] (**) | |-->Monitor "Monitor0"
[ 8.536] (**) | |-->Device "Device0"
[ 8.536] (**) | |-->GPUDevice "Device0"
[ 8.536] (**) | |-->GPUDevice "Device0"
[ 8.536] (**) |-->Input Device "Keyboard0"
[ 8.536] (**) |-->Input Device "Mouse0"
[ 8.536] (**) Option "Xinerama" "0"
[ 8.537] (==) Automatically adding devices
[ 8.537] (==) Automatically enabling devices
[ 8.537] (==) Automatically adding GPU devices
[ 8.537] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 8.537] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 8.537] Entry deleted from font path.
[ 8.537] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 8.537] Entry deleted from font path.
[ 8.537] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 8.537] Entry deleted from font path.
[ 8.537] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 8.537] Entry deleted from font path.
[ 8.537] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 8.537] Entry deleted from font path.
[ 8.537] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 8.537] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 8.537] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 8.537] (WW) Disabling Keyboard0
[ 8.537] (WW) Disabling Mouse0
[ 8.537] (II) Loader magic: 0x55716b531dc0
[ 8.537] (II) Module ABI versions:
[ 8.537] X.Org ANSI C Emulation: 0.4
[ 8.537] X.Org Video Driver: 20.0
[ 8.537] X.Org XInput driver : 22.1
[ 8.537] X.Org Server Extension : 9.0
[ 8.540] (++) using VT number 7

[ 8.540] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 8.540] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 8.541] (--) PCI:*(0:1:0:0) 10de:0622:0000:0000 rev 161, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000ef00/128, BIOS @ 0x????????/131072
[ 8.542] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 8.542] (II) LoadModule: "dbe"
[ 8.542] (II) Module "dbe" already built-in
[ 8.542] (II) LoadModule: "extmod"
[ 8.542] (II) Module "extmod" already built-in
[ 8.542] (II) LoadModule: "glx"
[ 8.542] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so
[ 8.778] (II) Module glx: vendor="NVIDIA Corporation"
[ 8.778] compiled for 4.0.2, module version = 1.0.0
[ 8.778] Module class: X.Org Server Extension
[ 8.778] (II) NVIDIA GLX Module 340.102 Mon Jan 16 12:37:38 PST 2017
[ 8.778] (II) LoadModule: "nvidia"
[ 8.778] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
[ 8.780] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 8.780] compiled for 4.0.2, module version = 1.0.0
[ 8.780] Module class: X.Org Video Driver
[ 8.780] (II) NVIDIA dlloader X Driver 340.102 Mon Jan 16 12:17:09 PST 2017
[ 8.780] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 9.623] (II) Loading sub module "fb"
[ 9.623] (II) LoadModule: "fb"
[ 9.625] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 9.625] (II) Module fb: vendor="X.Org Foundation"
[ 9.625] compiled for 1.18.4, module version = 1.0.0
[ 9.625] ABI class: X.Org ANSI C Emulation, version 0.4
[ 9.625] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 9.625] (II) Loading sub module "wfb"
[ 9.625] (II) LoadModule: "wfb"
[ 9.625] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 9.626] (II) Module wfb: vendor="X.Org Foundation"
[ 9.626] compiled for 1.18.4, module version = 1.0.0
[ 9.626] ABI class: X.Org ANSI C Emulation, version 0.4
[ 9.626] (II) Loading sub module "ramdac"
[ 9.626] (II) LoadModule: "ramdac"
[ 9.626] (II) Module "ramdac" already built-in
[ 9.676] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 9.676] (==) NVIDIA(0): RGB weight 888
[ 9.676] (==) NVIDIA(0): Default visual is TrueColor
[ 9.676] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 9.676] (**) NVIDIA(0): Option "Stereo" "0"
[ 9.676] (**) NVIDIA(0): Option "nvidiaXineramaInfoOrder" "DFP-0"
[ 9.677] (**) NVIDIA(0): Option "SLI" "Off"
[ 9.677] (**) NVIDIA(0): Option "MultiGPU" "Off"
[ 9.677] (**) NVIDIA(0): Option "BaseMosaic" "off"
[ 9.677] (**) NVIDIA(0): Stereo disabled by request
[ 9.677] (**) NVIDIA(0): NVIDIA SLI disabled.
[ 9.677] (**) NVIDIA(0): NVIDIA Multi-GPU disabled.
[ 9.677] (**) NVIDIA(0): Option "MetaModes" "DVI-I-2: 1920x1080 +0+0, DVI-I-1: 1360x768 +1920+0"
[ 9.677] (**) NVIDIA(0): Enabling 2D acceleration
[ 9.773] (WW) NVIDIA(0): Unable to read EDID for display device CRT-1
[ 9.796] (II) NVIDIA(0): Display (BenQ GW2760HS (DFP-0)) does not support NVIDIA 3D
[ 9.796] (II) NVIDIA(0): Vision stereo.
[ 9.796] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[ 9.798] (II) NVIDIA(0): NVIDIA GPU GeForce 9600 GT (G94) at PCI:1:0:0 (GPU-0)
[ 9.798] (--) NVIDIA(0): Memory: 524288 kBytes
[ 9.798] (--) NVIDIA(0): VideoBIOS: 62.94.3c.00.00
[ 9.798] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 9.799] (--) NVIDIA(0): Valid display device(s) on GeForce 9600 GT at PCI:1:0:0
[ 9.799] (--) NVIDIA(0): CRT-0
[ 9.799] (--) NVIDIA(0): CRT-1 (connected)
[ 9.799] (--) NVIDIA(0): TV-0
[ 9.799] (--) NVIDIA(0): BenQ GW2760HS (DFP-0) (boot, connected)
[ 9.799] (--) NVIDIA(0): DFP-1
[ 9.799] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 9.799] (--) NVIDIA(GPU-0): CRT-1: 400.0 MHz maximum pixel clock
[ 9.799] (--) NVIDIA(GPU-0): TV-0: 400.0 MHz maximum pixel clock
[ 9.799] (--) NVIDIA(0): BenQ GW2760HS (DFP-0): Internal TMDS
[ 9.799] (--) NVIDIA(GPU-0): BenQ GW2760HS (DFP-0): 330.0 MHz maximum pixel clock
[ 9.799] (--) NVIDIA(0): DFP-1: Internal TMDS
[ 9.799] (--) NVIDIA(GPU-0): DFP-1: 330.0 MHz maximum pixel clock
[ 9.799] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 9.799] (**) NVIDIA(0): device CRT-1 (Using EDID frequencies has been enabled on
[ 9.799] (**) NVIDIA(0): all display devices.)
[ 9.810] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 9.810] (**) NVIDIA(0): device BenQ GW2760HS (DFP-0) (Using EDID frequencies has
[ 9.810] (**) NVIDIA(0): been enabled on all display devices.)
[ 9.812] (II) NVIDIA(0): Validated MetaModes:
[ 9.812] (II) NVIDIA(0): "DVI-I-2:1920x1080+0+0,DVI-I-1:1360x768+1920+0"
[ 9.812] (II) NVIDIA(0): Virtual screen size determined to be 3280 x 1080
[ 9.834] (WW) NVIDIA(0): Unable to get display device CRT-1's EDID; cannot compute DPI
[ 9.834] (WW) NVIDIA(0): from CRT-1's EDID.
[ 9.834] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 9.835] (--) Depth 24 pixmap format is 32 bpp
[ 9.835] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 9.842] (II) NVIDIA(0): Setting mode "DVI-I-2:1920x1080+0+0,DVI-I-1:1360x768+1920+0"
[ 10.059] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 10.059] (==) NVIDIA(0): Backing store enabled
[ 10.059] (==) NVIDIA(0): Silken mouse enabled
[ 10.059] (**) NVIDIA(0): DPMS enabled
[ 10.059] (II) Loading sub module "dri2"
[ 10.059] (II) LoadModule: "dri2"
[ 10.059] (II) Module "dri2" already built-in
[ 10.059] (II) NVIDIA(0): [DRI2] Setup complete
[ 10.059] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 10.059] (--) RandR disabled
[ 10.064] (II) SELinux: Disabled on system
[ 10.065] (II) Initializing extension GLX
[ 10.065] (II) Indirect GLX disabled.(II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 10.127] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 10.127] (II) LoadModule: "evdev"
[ 10.127] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 10.128] (II) Module evdev: vendor="X.Org Foundation"
[ 10.128] compiled for 1.18.1, module version = 2.10.1
[ 10.128] Module class: X.Org XInput Driver
[ 10.128] ABI class: X.Org XInput driver, version 22.1
[ 10.128] (II) Using input driver 'evdev' for 'Power Button'
[ 10.128] (**) Power Button: always reports core events
[ 10.128] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 10.128] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 10.128] (--) evdev: Power Button: Found keys
[ 10.128] (II) evdev: Power Button: Configuring as keyboard
[ 10.128] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 10.128] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 10.128] (**) Option "xkb_rules" "evdev"
[ 10.128] (**) Option "xkb_model" "pc105"
[ 10.128] (**) Option "xkb_layout" "us,ru"
[ 10.128] (**) Option "xkb_variant" ","
[ 10.128] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 10.162] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 10.162] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 10.162] (II) Using input driver 'evdev' for 'Power Button'
[ 10.162] (**) Power Button: always reports core events
[ 10.162] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 10.162] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 10.162] (--) evdev: Power Button: Found keys
[ 10.162] (II) evdev: Power Button: Configuring as keyboard
[ 10.162] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 10.162] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 10.162] (**) Option "xkb_rules" "evdev"
[ 10.162] (**) Option "xkb_model" "pc105"
[ 10.162] (**) Option "xkb_layout" "us,ru"
[ 10.162] (**) Option "xkb_variant" ","
[ 10.162] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 10.163] (II) config/udev: Adding input device SIGMACHIP USB Keyboard (/dev/input/event2)
[ 10.163] (**) SIGMACHIP USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 10.163] (II) Using input driver 'evdev' for 'SIGMACHIP USB Keyboard'
[ 10.163] (**) SIGMACHIP USB Keyboard: always reports core events
[ 10.163] (**) evdev: SIGMACHIP USB Keyboard: Device: "/dev/input/event2"
[ 10.163] (--) evdev: SIGMACHIP USB Keyboard: Vendor 0x1c4f Product 0x2
[ 10.163] (--) evdev: SIGMACHIP USB Keyboard: Found keys
[ 10.163] (II) evdev: SIGMACHIP USB Keyboard: Configuring as keyboard
[ 10.163] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/0003:1C4F:0002.0001/input/input3/event2"
[ 10.163] (II) XINPUT: Adding extended input device "SIGMACHIP USB Keyboard" (type: KEYBOARD, id 8)
[ 10.163] (**) Option "xkb_rules" "evdev"
[ 10.163] (**) Option "xkb_model" "pc105"
[ 10.163] (**) Option "xkb_layout" "us,ru"
[ 10.163] (**) Option "xkb_variant" ","
[ 10.163] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 10.163] (II) config/udev: Adding input device SIGMACHIP USB Keyboard (/dev/input/event4)
[ 10.163] (**) SIGMACHIP USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 10.163] (II) Using input driver 'evdev' for 'SIGMACHIP USB Keyboard'
[ 10.163] (**) SIGMACHIP USB Keyboard: always reports core events
[ 10.163] (**) evdev: SIGMACHIP USB Keyboard: Device: "/dev/input/event4"
[ 10.164] (--) evdev: SIGMACHIP USB Keyboard: Vendor 0x1c4f Product 0x2
[ 10.164] (--) evdev: SIGMACHIP USB Keyboard: Found 1 mouse buttons
[ 10.164] (--) evdev: SIGMACHIP USB Keyboard: Found scroll wheel(s)
[ 10.164] (--) evdev: SIGMACHIP USB Keyboard: Found relative axes
[ 10.164] (II) evdev: SIGMACHIP USB Keyboard: Forcing relative x/y axes to exist.
[ 10.164] (--) evdev: SIGMACHIP USB Keyboard: Found absolute axes
[ 10.164] (II) evdev: SIGMACHIP USB Keyboard: Forcing absolute x/y axes to exist.
[ 10.164] (--) evdev: SIGMACHIP USB Keyboard: Found keys
[ 10.164] (II) evdev: SIGMACHIP USB Keyboard: Configuring as mouse
[ 10.164] (II) evdev: SIGMACHIP USB Keyboard: Configuring as keyboard
[ 10.164] (II) evdev: SIGMACHIP USB Keyboard: Adding scrollwheel support
[ 10.164] (**) evdev: SIGMACHIP USB Keyboard: YAxisMapping: buttons 4 and 5
[ 10.164] (**) evdev: SIGMACHIP USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 10.164] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.1/0003:1C4F:0002.0002/input/input5/event4"
[ 10.164] (II) XINPUT: Adding extended input device "SIGMACHIP USB Keyboard" (type: KEYBOARD, id 9)
[ 10.164] (**) Option "xkb_rules" "evdev"
[ 10.164] (**) Option "xkb_model" "pc105"
[ 10.164] (**) Option "xkb_layout" "us,ru"
[ 10.164] (**) Option "xkb_variant" ","
[ 10.164] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 10.164] (II) evdev: SIGMACHIP USB Keyboard: initialized for relative axes.
[ 10.164] (WW) evdev: SIGMACHIP USB Keyboard: ignoring absolute axes.
[ 10.164] (**) SIGMACHIP USB Keyboard: (accel) keeping acceleration scheme 1
[ 10.164] (**) SIGMACHIP USB Keyboard: (accel) acceleration profile 0
[ 10.164] (**) SIGMACHIP USB Keyboard: (accel) acceleration factor: 2.000
[ 10.164] (**) SIGMACHIP USB Keyboard: (accel) acceleration threshold: 4
[ 10.164] (II) config/udev: Adding input device UVC Camera (046d:0825) (/dev/input/event6)
[ 10.165] (**) UVC Camera (046d:0825): Applying InputClass "evdev keyboard catchall"
[ 10.165] (II) Using input driver 'evdev' for 'UVC Camera (046d:0825)'
[ 10.165] (**) UVC Camera (046d:0825): always reports core events
[ 10.165] (**) evdev: UVC Camera (046d:0825): Device: "/dev/input/event6"
[ 10.165] (--) evdev: UVC Camera (046d:0825): Vendor 0x46d Product 0x825
[ 10.165] (--) evdev: UVC Camera (046d:0825): Found keys
[ 10.165] (II) evdev: UVC Camera (046d:0825): Configuring as keyboard
[ 10.165] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4:1.0/input/input7/event6"
[ 10.165] (II) XINPUT: Adding extended input device "UVC Camera (046d:0825)" (type: KEYBOARD, id 10)
[ 10.165] (**) Option "xkb_rules" "evdev"
[ 10.165] (**) Option "xkb_model" "pc105"
[ 10.165] (**) Option "xkb_layout" "us,ru"
[ 10.165] (**) Option "xkb_variant" ","
[ 10.165] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 10.165] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event3)
[ 10.165] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 10.165] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 10.165] (**) Logitech USB Receiver: always reports core events
[ 10.165] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event3"
[ 10.224] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[ 10.224] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[ 10.224] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 10.224] (--) evdev: Logitech USB Receiver: Found relative axes
[ 10.224] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 10.224] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 10.224] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 10.224] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 10.224] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 10.224] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/0003:046D:C52F.0003/input/input4/event3"
[ 10.224] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 11)
[ 10.224] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 10.225] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 10.225] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 10.225] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 10.225] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 10.227] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 10.227] (II) No input driver specified, ignoring this device.
[ 10.227] (II) This device may have been added with another device file.
[ 10.228] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event5)
[ 10.228] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 10.228] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 10.228] (**) Logitech USB Receiver: always reports core events
[ 10.228] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event5"
[ 10.229] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[ 10.229] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[ 10.229] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 10.229] (--) evdev: Logitech USB Receiver: Found relative axes
[ 10.229] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[ 10.229] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 10.229] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[ 10.229] (--) evdev: Logitech USB Receiver: Found keys
[ 10.229] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 10.229] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 10.229] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 10.229] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 10.229] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 10.229] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.1/0003:046D:C52F.0004/input/input6/event5"
[ 10.229] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 12)
[ 10.229] (**) Option "xkb_rules" "evdev"
[ 10.229] (**) Option "xkb_model" "pc105"
[ 10.229] (**) Option "xkb_layout" "us,ru"
[ 10.229] (**) Option "xkb_variant" ","
[ 10.229] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 10.230] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 10.230] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 10.230] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 10.230] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 10.230] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 10.230] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 10.238] (WW) config/udev: device UVC Camera (046d:0825) already added. Ignoring.
[ 17.050] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
[ 17.073] (II) NVIDIA(GPU-0): Display (BenQ GW2760HS (DFP-0)) does not support NVIDIA 3D
[ 17.073] (II) NVIDIA(GPU-0): Vision stereo.
[ 17.128] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
[ 17.157] (II) NVIDIA(GPU-0): Display (BenQ GW2760HS (DFP-0)) does not support NVIDIA 3D
[ 17.157] (II) NVIDIA(GPU-0): Vision stereo.
[ 17.218] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
[ 17.241] (II) NVIDIA(GPU-0): Display (BenQ GW2760HS (DFP-0)) does not support NVIDIA 3D
[ 17.242] (II) NVIDIA(GPU-0): Vision stereo.
[ 17.442] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
[ 17.465] (II) NVIDIA(GPU-0): Display (BenQ GW2760HS (DFP-0)) does not support NVIDIA 3D
[ 17.466] (II) NVIDIA(GPU-0): Vision stereo.
[ 17.469] (II) NVIDIA(0): Setting mode "DVI-I-2: 1920x1080 @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[ 17.652] (II) NVIDIA(0): Setting mode "DVI-I-1: nvidia-auto-select @1024x768 +0+0 {ViewPortIn=1024x768, ViewPortOut=1024x768+0+0}"
[ 17.722] (II) NVIDIA(0): Setting mode "DVI-I-2: nvidia-auto-select @1920x1080 +1024+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}, DVI-I-1: nvidia-auto-select @1024x768 +0+0 {ViewPortIn=1024x768, ViewPortOut=1024x768+0+0}"
[ 17.906] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
[ 17.935] (II) NVIDIA(GPU-0): Display (BenQ GW2760HS (DFP-0)) does not support NVIDIA 3D
[ 17.935] (II) NVIDIA(GPU-0): Vision stereo.
[ 19.626] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
[ 19.649] (II) NVIDIA(GPU-0): Display (BenQ GW2760HS (DFP-0)) does not support NVIDIA 3D
[ 19.649] (II) NVIDIA(GPU-0): Vision stereo.
[ 21.972] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
[ 22.000] (II) NVIDIA(GPU-0): Display (BenQ GW2760HS (DFP-0)) does not support NVIDIA 3D
[ 22.000] (II) NVIDIA(GPU-0): Vision stereo.
[ 54.854] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
[ 54.877] (II) NVIDIA(GPU-0): Display (BenQ GW2760HS (DFP-0)) does not support NVIDIA 3D
[ 54.877] (II) NVIDIA(GPU-0): Vision stereo.
[ 55.046] (II) NVIDIA(0): Setting mode "DPY-3:1920x1080+0+0,DPY-1:nvidia-auto-select+1920+0"
[ 55.631] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
[ 55.659] (II) NVIDIA(GPU-0): Display (BenQ GW2760HS (DFP-0)) does not support NVIDIA 3D
[ 55.659] (II) NVIDIA(GPU-0): Vision stereo.
[ 76.105] (II) NVIDIA(0): Setting mode "DPY-3:1920x1080+0+0,DPY-1:1360x768+1920+0"
[ 76.527] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
[ 76.550] (II) NVIDIA(GPU-0): Display (BenQ GW2760HS (DFP-0)) does not support NVIDIA 3D
[ 76.550] (II) NVIDIA(GPU-0): Vision stereo.
В начале я не понимаю особо что там, но когда я вручную меняю это видно, что вначале загружается не с теми настройками.

Аватара пользователя

Chocobo
Сообщения: 5979
Зарегистрирован: 27 авг 2016, 19:57
Решено: 136
Откуда: НН
Благодарил (а): 425 раз
Поблагодарили: 1550 раз

Не сохраняются настройки экрана

Сообщение Chocobo » 23 авг 2017, 19:37

Читаются они и тут и там:
mr.v писал(а): [ 8.531] (==) Using config file: "/etc/X11/xorg.conf"
[ 8.531] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
Причем читаются корректно
mr.v писал(а): [ 9.842] (II) NVIDIA(0): Setting mode "DVI-I-2:1920x1080+0+0,DVI-I-1:1360x768+1920+0"
Но потом он перебивает их неким автоселектом
mr.v писал(а): 17.469] (II) NVIDIA(0): Setting mode "DVI-I-2: 1920x1080 @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[ 17.652] (II) NVIDIA(0): Setting mode "DVI-I-1: nvidia-auto-select @1024x768 +0+0 {ViewPortIn=1024x768, ViewPortOut=1024x768+0+0}"
[ 17.722] (II) NVIDIA(0): Setting mode "DVI-I-2: nvidia-auto-select @1920x1080 +1024+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}, DVI-I-1: nvidia-auto-select @1024x768 +0+0 {ViewPortIn=1024x768, ViewPortOut=1024x768+0+0}"


Автор темы
mr.v
Сообщения: 14
Зарегистрирован: 23 авг 2017, 16:55
Решено: 1

Не сохраняются настройки экрана

Сообщение mr.v » 23 авг 2017, 19:40

Да, ксттаи забыл уточнить еще один момент - что при приветственном экране всё нормально. После ввода пароля когда уже логинишься переключается вот на ненормальное.

Аватара пользователя

Unborn
Сообщения: 859
Зарегистрирован: 03 сен 2016, 10:36
Решено: 15
Благодарил (а): 2 раза
Поблагодарили: 129 раз

Не сохраняются настройки экрана

Сообщение Unborn » 23 авг 2017, 20:10

mr.v, ТВ не поддерживает EDID. Драйвер каждый раз определяет и конфигурирует его. Параметры не будут сохранятся nvidia-settings, по твоему xorg.conf видно только один монитор.
Изучай - https://wiki.archlinux.org/index.php/NV ... 8%D0%B9%29
Инструкции нужно читать, а не то, что кто-то там что-то пишет.
Можешь отдельно 10-monitor.conf создать. А xorg.conf - это как сводная информация для размышления. Анализ конфигурации - xorg.conf + лог загрузки и настраивай. Сейчас всё на автомате, а конфиги - это уже частные случаи.
Chocobo писал(а): Но потом он перебивает их неким автоселектом
В принципе, правильно делает.


Автор темы
mr.v
Сообщения: 14
Зарегистрирован: 23 авг 2017, 16:55
Решено: 1

Не сохраняются настройки экрана

Сообщение mr.v » 23 авг 2017, 20:46

Спасибо за подсказку. Три раза прочитал статью - ничего не понял. Попробовал интуитивно как мне казалось правильно подредактировать конфиги - искы вообще перестали грузиться. Зашел с виндов, откачуcь на 18.1 или вообще нафиг на винде буду сидеть, надоело весь день возиться с этой херней.
Всем спасибо.

Аватара пользователя

Chocobo
Сообщения: 5979
Зарегистрирован: 27 авг 2016, 19:57
Решено: 136
Откуда: НН
Благодарил (а): 425 раз
Поблагодарили: 1550 раз

Не сохраняются настройки экрана

Сообщение Chocobo » 24 авг 2017, 05:56

mr.v писал(а):
[ 9.773] (WW) NVIDIA(0): Unable to read EDID for display device CRT-1
[ 9.834] (WW) NVIDIA(0): Unable to get display device CRT-1's EDID; cannot compute DPI
Так может тогда дать директивы в конфиг типа такого в блок Device

Код: Выделить всё

Option       "UseEDID" "false" 
Option "IgnoreEDIDChecksum" "CRT-1"
Также попробовать навернуть разрешение вручную с xrandr, и если прокатит то добвить modeline и PreferredMode в секцию Monitor

Ну и вообще - если 304-й еще доступен драйвер, для 9600GT я бы вероятно ставил его, и возможно не на 18.2 (тут уже смотря по остальному железу)


Автор темы
mr.v
Сообщения: 14
Зарегистрирован: 23 авг 2017, 16:55
Решено: 1

Не сохраняются настройки экрана

Сообщение mr.v » 24 авг 2017, 13:48

Chocobo писал(а):
Так может тогда дать директивы в конфиг типа такого в блок Device

Код: Выделить всё
Option "UseEDID" "false"
Option "IgnoreEDIDChecksum" "CRT-1"

Так стало еще хуже: монитор вообще не определяется и макс разрешение 1024*768 можно выставить, еле вернул обратно всё.
[ 9.168]
X.Org X Server 1.18.4
Release Date: 2016-07-19
[ 9.168] X Protocol Version 11, Revision 0
[ 9.168] Build Operating System: Linux 4.4.0-83-generic x86_64 Ubuntu
[ 9.168] Current Operating System: Linux mdma-GA-MA770T-UD3P 4.10.0-32-generic #36~16.04.1-Ubuntu SMP Wed Aug 9 09:19:02 UTC 2017 x86_64
[ 9.168] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.10.0-32-generic root=UUID=7c86bfa7-5edd-44db-ba0d-782f54fc6495 ro quiet splash
[ 9.168] Build Date: 17 July 2017 05:05:12PM
[ 9.168] xorg-server 2:1.18.4-0ubuntu0.3 (For technical support please see http://www.ubuntu.com/support)
[ 9.168] Current version of pixman: 0.33.6
[ 9.168] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 9.168] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 9.168] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Aug 24 16:37:09 2017
[ 9.171] (==) Using config file: "/etc/X11/xorg.conf"
[ 9.171] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 9.173] (==) ServerLayout "Layout0"
[ 9.173] (**) |-->Screen "Screen0" (0)
[ 9.173] (**) | |-->Monitor "Monitor0"
[ 9.173] (**) | |-->Device "Device0"
[ 9.173] (**) | |-->GPUDevice "Device1"
[ 9.173] (**) | |-->GPUDevice "Device0"
[ 9.173] (**) | |-->GPUDevice "Device0"
[ 9.173] (**) | |-->GPUDevice "Device1"
[ 9.173] (**) |-->Input Device "Keyboard0"
[ 9.173] (**) |-->Input Device "Mouse0"
[ 9.173] (**) Option "Xinerama" "0"
[ 9.173] (==) Automatically adding devices
[ 9.173] (==) Automatically enabling devices
[ 9.173] (==) Automatically adding GPU devices
[ 9.173] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 9.173] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 9.173] Entry deleted from font path.
[ 9.173] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 9.173] Entry deleted from font path.
[ 9.173] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 9.173] Entry deleted from font path.
[ 9.173] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 9.173] Entry deleted from font path.
[ 9.173] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 9.173] Entry deleted from font path.
[ 9.173] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 9.173] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 9.173] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 9.173] (WW) Disabling Keyboard0
[ 9.173] (WW) Disabling Mouse0
[ 9.173] (II) Loader magic: 0x5592fcbc8dc0
[ 9.173] (II) Module ABI versions:
[ 9.173] X.Org ANSI C Emulation: 0.4
[ 9.173] X.Org Video Driver: 20.0
[ 9.173] X.Org XInput driver : 22.1
[ 9.173] X.Org Server Extension : 9.0
[ 9.174] (++) using VT number 7

[ 9.174] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 9.174] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 9.176] (--) PCI:*(0:1:0:0) 10de:0622:0000:0000 rev 161, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000ef00/128, BIOS @ 0x????????/131072
[ 9.176] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 9.176] (II) LoadModule: "dbe"
[ 9.176] (II) Module "dbe" already built-in
[ 9.176] (II) LoadModule: "extmod"
[ 9.176] (II) Module "extmod" already built-in
[ 9.176] (II) LoadModule: "glx"
[ 9.176] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so
[ 9.325] (II) Module glx: vendor="NVIDIA Corporation"
[ 9.325] compiled for 4.0.2, module version = 1.0.0
[ 9.325] Module class: X.Org Server Extension
[ 9.325] (II) NVIDIA GLX Module 340.102 Mon Jan 16 12:37:38 PST 2017
[ 9.325] (II) LoadModule: "nvidia"
[ 9.325] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
[ 9.328] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 9.328] compiled for 4.0.2, module version = 1.0.0
[ 9.328] Module class: X.Org Video Driver
[ 9.328] (II) NVIDIA dlloader X Driver 340.102 Mon Jan 16 12:17:09 PST 2017
[ 9.328] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 9.453] (II) Loading sub module "fb"
[ 9.453] (II) LoadModule: "fb"
[ 9.454] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 9.454] (II) Module fb: vendor="X.Org Foundation"
[ 9.454] compiled for 1.18.4, module version = 1.0.0
[ 9.454] ABI class: X.Org ANSI C Emulation, version 0.4
[ 9.454] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 9.454] (II) Loading sub module "wfb"
[ 9.454] (II) LoadModule: "wfb"
[ 9.454] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 9.454] (II) Module wfb: vendor="X.Org Foundation"
[ 9.454] compiled for 1.18.4, module version = 1.0.0
[ 9.454] ABI class: X.Org ANSI C Emulation, version 0.4
[ 9.454] (II) Loading sub module "ramdac"
[ 9.454] (II) LoadModule: "ramdac"
[ 9.454] (II) Module "ramdac" already built-in
[ 9.455] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 9.455] (==) NVIDIA(0): RGB weight 888
[ 9.455] (==) NVIDIA(0): Default visual is TrueColor
[ 9.455] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 9.455] (**) NVIDIA(0): Option "Stereo" "0"
[ 9.456] (**) NVIDIA(0): Option "nvidiaXineramaInfoOrder" "DFP-0"
[ 9.456] (**) NVIDIA(0): Option "SLI" "Off"
[ 9.456] (**) NVIDIA(0): Option "MultiGPU" "Off"
[ 9.456] (**) NVIDIA(0): Option "BaseMosaic" "off"
[ 9.456] (**) NVIDIA(0): Stereo disabled by request
[ 9.456] (**) NVIDIA(0): NVIDIA SLI disabled.
[ 9.456] (**) NVIDIA(0): NVIDIA Multi-GPU disabled.
[ 9.456] (**) NVIDIA(0): Option "UseEDID" "false"
[ 9.456] (**) NVIDIA(0): Option "IgnoreEDIDChecksum" "CRT-1"
[ 9.456] (**) NVIDIA(0): Option "MetaModes" "DVI-I-2: 1920x1080 +0+0, DVI-I-1: 1360x768 +1920+0"
[ 9.456] (**) NVIDIA(0): Enabling 2D acceleration
[ 9.456] (**) NVIDIA(0): Ignoring EDIDs
[ 10.094] (II) NVIDIA(0): Not probing EDID on CRT-1.
[ 10.094] (II) NVIDIA(0): Not probing EDID on DFP-0.
[ 10.094] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[ 10.095] (II) NVIDIA(0): NVIDIA GPU GeForce 9600 GT (G94) at PCI:1:0:0 (GPU-0)
[ 10.095] (--) NVIDIA(0): Memory: 524288 kBytes
[ 10.095] (--) NVIDIA(0): VideoBIOS: 62.94.3c.00.00
[ 10.095] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 10.096] (--) NVIDIA(0): Valid display device(s) on GeForce 9600 GT at PCI:1:0:0
[ 10.096] (--) NVIDIA(0): CRT-0
[ 10.096] (--) NVIDIA(0): CRT-1 (connected)
[ 10.096] (--) NVIDIA(0): TV-0
[ 10.096] (--) NVIDIA(0): DFP-0 (boot, connected)
[ 10.096] (--) NVIDIA(0): DFP-1
[ 10.096] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 10.096] (--) NVIDIA(GPU-0): CRT-1: 400.0 MHz maximum pixel clock
[ 10.096] (--) NVIDIA(GPU-0): TV-0: 400.0 MHz maximum pixel clock
[ 10.096] (--) NVIDIA(0): DFP-0: Internal TMDS
[ 10.096] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 10.096] (--) NVIDIA(0): DFP-1: Internal TMDS
[ 10.096] (--) NVIDIA(GPU-0): DFP-1: 330.0 MHz maximum pixel clock
[ 10.096] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 10.096] (**) NVIDIA(0): device CRT-1 (Using EDID frequencies has been enabled on
[ 10.096] (**) NVIDIA(0): all display devices.)
[ 10.106] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 10.106] (**) NVIDIA(0): device DFP-0 (Using EDID frequencies has been enabled on
[ 10.106] (**) NVIDIA(0): all display devices.)
[ 10.106] (II) NVIDIA(0): Validated MetaModes:
[ 10.106] (II) NVIDIA(0): "DVI-I-2:1920x1080+0+0,DVI-I-1:1360x768+1920+0"
[ 10.106] (II) NVIDIA(0): Virtual screen size determined to be 3280 x 768
[ 10.134] (WW) NVIDIA(0): Unable to get display device CRT-1's EDID; cannot compute DPI
[ 10.134] (WW) NVIDIA(0): from CRT-1's EDID.
[ 10.135] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 10.135] (--) Depth 24 pixmap format is 32 bpp
[ 10.135] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 10.141] (II) NVIDIA(0): Setting mode "DVI-I-2:1920x1080+0+0,DVI-I-1:1360x768+1920+0"
[ 10.201] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 10.201] (==) NVIDIA(0): Backing store enabled
[ 10.201] (==) NVIDIA(0): Silken mouse enabled
[ 10.201] (**) NVIDIA(0): DPMS enabled
[ 10.201] (II) Loading sub module "dri2"
[ 10.201] (II) LoadModule: "dri2"
[ 10.201] (II) Module "dri2" already built-in
[ 10.201] (II) NVIDIA(0): [DRI2] Setup complete
[ 10.201] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 10.201] (--) RandR disabled
[ 10.206] (II) SELinux: Disabled on system
[ 10.207] (II) Initializing extension GLX
[ 10.207] (II) Indirect GLX disabled.(II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 10.256] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 10.256] (II) LoadModule: "evdev"
[ 10.256] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 10.256] (II) Module evdev: vendor="X.Org Foundation"
[ 10.256] compiled for 1.18.1, module version = 2.10.1
[ 10.256] Module class: X.Org XInput Driver
[ 10.256] ABI class: X.Org XInput driver, version 22.1
[ 10.256] (II) Using input driver 'evdev' for 'Power Button'
[ 10.256] (**) Power Button: always reports core events
[ 10.257] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 10.257] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 10.257] (--) evdev: Power Button: Found keys
[ 10.257] (II) evdev: Power Button: Configuring as keyboard
[ 10.257] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 10.257] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 10.257] (**) Option "xkb_rules" "evdev"
[ 10.257] (**) Option "xkb_model" "pc105"
[ 10.257] (**) Option "xkb_layout" "us,ru"
[ 10.257] (**) Option "xkb_variant" ","
[ 10.257] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 10.290] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 10.290] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 10.290] (II) Using input driver 'evdev' for 'Power Button'
[ 10.290] (**) Power Button: always reports core events
[ 10.290] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 10.290] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 10.290] (--) evdev: Power Button: Found keys
[ 10.290] (II) evdev: Power Button: Configuring as keyboard
[ 10.290] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 10.290] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 10.290] (**) Option "xkb_rules" "evdev"
[ 10.290] (**) Option "xkb_model" "pc105"
[ 10.290] (**) Option "xkb_layout" "us,ru"
[ 10.290] (**) Option "xkb_variant" ","
[ 10.290] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 10.291] (II) config/udev: Adding input device SIGMACHIP USB Keyboard (/dev/input/event3)
[ 10.291] (**) SIGMACHIP USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 10.291] (II) Using input driver 'evdev' for 'SIGMACHIP USB Keyboard'
[ 10.291] (**) SIGMACHIP USB Keyboard: always reports core events
[ 10.291] (**) evdev: SIGMACHIP USB Keyboard: Device: "/dev/input/event3"
[ 10.291] (--) evdev: SIGMACHIP USB Keyboard: Vendor 0x1c4f Product 0x2
[ 10.291] (--) evdev: SIGMACHIP USB Keyboard: Found keys
[ 10.291] (II) evdev: SIGMACHIP USB Keyboard: Configuring as keyboard
[ 10.291] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/0003:1C4F:0002.0001/input/input4/event3"
[ 10.291] (II) XINPUT: Adding extended input device "SIGMACHIP USB Keyboard" (type: KEYBOARD, id 8)
[ 10.291] (**) Option "xkb_rules" "evdev"
[ 10.291] (**) Option "xkb_model" "pc105"
[ 10.291] (**) Option "xkb_layout" "us,ru"
[ 10.291] (**) Option "xkb_variant" ","
[ 10.291] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 10.291] (II) config/udev: Adding input device SIGMACHIP USB Keyboard (/dev/input/event5)
[ 10.291] (**) SIGMACHIP USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 10.291] (II) Using input driver 'evdev' for 'SIGMACHIP USB Keyboard'
[ 10.291] (**) SIGMACHIP USB Keyboard: always reports core events
[ 10.291] (**) evdev: SIGMACHIP USB Keyboard: Device: "/dev/input/event5"
[ 10.291] (--) evdev: SIGMACHIP USB Keyboard: Vendor 0x1c4f Product 0x2
[ 10.291] (--) evdev: SIGMACHIP USB Keyboard: Found 1 mouse buttons
[ 10.291] (--) evdev: SIGMACHIP USB Keyboard: Found scroll wheel(s)
[ 10.291] (--) evdev: SIGMACHIP USB Keyboard: Found relative axes
[ 10.291] (II) evdev: SIGMACHIP USB Keyboard: Forcing relative x/y axes to exist.
[ 10.292] (--) evdev: SIGMACHIP USB Keyboard: Found absolute axes
[ 10.292] (II) evdev: SIGMACHIP USB Keyboard: Forcing absolute x/y axes to exist.
[ 10.292] (--) evdev: SIGMACHIP USB Keyboard: Found keys
[ 10.292] (II) evdev: SIGMACHIP USB Keyboard: Configuring as mouse
[ 10.292] (II) evdev: SIGMACHIP USB Keyboard: Configuring as keyboard
[ 10.292] (II) evdev: SIGMACHIP USB Keyboard: Adding scrollwheel support
[ 10.292] (**) evdev: SIGMACHIP USB Keyboard: YAxisMapping: buttons 4 and 5
[ 10.292] (**) evdev: SIGMACHIP USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 10.292] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.1/0003:1C4F:0002.0004/input/input6/event5"
[ 10.292] (II) XINPUT: Adding extended input device "SIGMACHIP USB Keyboard" (type: KEYBOARD, id 9)
[ 10.292] (**) Option "xkb_rules" "evdev"
[ 10.292] (**) Option "xkb_model" "pc105"
[ 10.292] (**) Option "xkb_layout" "us,ru"
[ 10.292] (**) Option "xkb_variant" ","
[ 10.292] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 10.292] (II) evdev: SIGMACHIP USB Keyboard: initialized for relative axes.
[ 10.292] (WW) evdev: SIGMACHIP USB Keyboard: ignoring absolute axes.
[ 10.292] (**) SIGMACHIP USB Keyboard: (accel) keeping acceleration scheme 1
[ 10.292] (**) SIGMACHIP USB Keyboard: (accel) acceleration profile 0
[ 10.292] (**) SIGMACHIP USB Keyboard: (accel) acceleration factor: 2.000
[ 10.292] (**) SIGMACHIP USB Keyboard: (accel) acceleration threshold: 4
[ 10.292] (II) config/udev: Adding input device UVC Camera (046d:0825) (/dev/input/event6)
[ 10.293] (**) UVC Camera (046d:0825): Applying InputClass "evdev keyboard catchall"
[ 10.293] (II) Using input driver 'evdev' for 'UVC Camera (046d:0825)'
[ 10.293] (**) UVC Camera (046d:0825): always reports core events
[ 10.293] (**) evdev: UVC Camera (046d:0825): Device: "/dev/input/event6"
[ 10.293] (--) evdev: UVC Camera (046d:0825): Vendor 0x46d Product 0x825
[ 10.293] (--) evdev: UVC Camera (046d:0825): Found keys
[ 10.293] (II) evdev: UVC Camera (046d:0825): Configuring as keyboard
[ 10.293] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4:1.0/input/input7/event6"
[ 10.293] (II) XINPUT: Adding extended input device "UVC Camera (046d:0825)" (type: KEYBOARD, id 10)
[ 10.293] (**) Option "xkb_rules" "evdev"
[ 10.293] (**) Option "xkb_model" "pc105"
[ 10.293] (**) Option "xkb_layout" "us,ru"
[ 10.293] (**) Option "xkb_variant" ","
[ 10.293] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 10.293] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
[ 10.293] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 10.293] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 10.293] (**) Logitech USB Receiver: always reports core events
[ 10.293] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event2"
[ 10.352] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[ 10.352] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[ 10.352] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 10.352] (--) evdev: Logitech USB Receiver: Found relative axes
[ 10.352] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 10.352] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 10.352] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 10.352] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 10.352] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 10.352] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/0003:046D:C52F.0002/input/input3/event2"
[ 10.352] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 11)
[ 10.352] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 10.353] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 10.353] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 10.353] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 10.353] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 10.355] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 10.355] (II) No input driver specified, ignoring this device.
[ 10.355] (II) This device may have been added with another device file.
[ 10.356] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event4)
[ 10.356] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 10.356] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 10.356] (**) Logitech USB Receiver: always reports core events
[ 10.356] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event4"
[ 10.357] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[ 10.357] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[ 10.357] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 10.357] (--) evdev: Logitech USB Receiver: Found relative axes
[ 10.357] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[ 10.357] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 10.357] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[ 10.357] (--) evdev: Logitech USB Receiver: Found keys
[ 10.357] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 10.357] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 10.357] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 10.357] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 10.357] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 10.357] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.1/0003:046D:C52F.0003/input/input5/event4"
[ 10.357] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 12)
[ 10.357] (**) Option "xkb_rules" "evdev"
[ 10.357] (**) Option "xkb_model" "pc105"
[ 10.357] (**) Option "xkb_layout" "us,ru"
[ 10.357] (**) Option "xkb_variant" ","
[ 10.357] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 10.358] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 10.358] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 10.358] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 10.358] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 10.358] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 10.358] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 38.111] (II) NVIDIA(GPU-0): Not probing EDID on CRT-1.
[ 38.111] (II) NVIDIA(GPU-0): Not probing EDID on DFP-0.
[ 38.172] (II) NVIDIA(GPU-0): Not probing EDID on CRT-1.
[ 38.172] (II) NVIDIA(GPU-0): Not probing EDID on DFP-0.
[ 38.236] (II) NVIDIA(GPU-0): Not probing EDID on CRT-1.
[ 38.236] (II) NVIDIA(GPU-0): Not probing EDID on DFP-0.
[ 38.279] (II) NVIDIA(GPU-0): Not probing EDID on CRT-1.
[ 38.279] (II) NVIDIA(GPU-0): Not probing EDID on DFP-0.
[ 38.407] (II) NVIDIA(0): Setting mode "NULL"
[ 38.499] (II) NVIDIA(0): Setting mode "DVI-I-2: nvidia-auto-select @800x600 +1024+0 {ViewPortIn=800x600, ViewPortOut=800x600+0+0}"
[ 38.540] (II) NVIDIA(0): Setting mode "DVI-I-2: nvidia-auto-select @800x600 +1024+0 {ViewPortIn=800x600, ViewPortOut=800x600+0+0}, DVI-I-1: nvidia-auto-select @1024x768 +0+0 {ViewPortIn=1024x768, ViewPortOut=1024x768+0+0}"
[ 38.755] (II) NVIDIA(GPU-0): Not probing EDID on CRT-1.
[ 38.755] (II) NVIDIA(GPU-0): Not probing EDID on DFP-0.
[ 40.794] (II) NVIDIA(GPU-0): Not probing EDID on CRT-1.
[ 40.794] (II) NVIDIA(GPU-0): Not probing EDID on DFP-0.
[ 43.153] (II) NVIDIA(GPU-0): Not probing EDID on CRT-1.
[ 43.153] (II) NVIDIA(GPU-0): Not probing EDID on DFP-0.
и всё равно он автоселектом этим дуратским переключает, надо как-то его отключить нафиг.
уже второй день пошел, что я только не пробовал, и второй монитор ему указывал и всякую еренду которая в голову приходила пробовал.. иксы уже не один раз приходилось из консоли восстанавливать :)


Автор темы
mr.v
Сообщения: 14
Зарегистрирован: 23 авг 2017, 16:55
Решено: 1

Не сохраняются настройки экрана

Сообщение mr.v » 24 авг 2017, 13:57

Chocobo писал(а): Также попробовать навернуть разрешение вручную с xrandr, и если прокатит то добвить modeline и PreferredMode в секцию Monitor

Ну и вообще - если 304-й еще доступен драйвер, для 9600GT я бы вероятно ставил его, и возможно не на 18.2 (тут уже смотря по остальному железу)
С xrandr тоже пробовал разобраться, все что получилось поменять разрешение, а толку оно все равно возвращается обратно после перезагрузки. Надо в скрипт и автозагрузку наврено как-то... но позиции у меня там не получилось сделать всё равно.


Автор темы
mr.v
Сообщения: 14
Зарегистрирован: 23 авг 2017, 16:55
Решено: 1

Не сохраняются настройки экрана

Сообщение mr.v » 24 авг 2017, 14:18

Сделал в общем.

Код: Выделить всё

xrandr --output DVI-I-2 --primary
xrandr --output DVI-I-1 --mode 1360x768 --right-of DVI-I-2
Это в автозагрузку. Только экраны гаснут на несколько секунд при загрузке, но это мелочи. Нафиг я столько парился этими конфигами?? хД

Вернуться в «Параметры и оптимизация»