LinuxMint.com.ru

Код: Выделить всё

System:    Kernel: 5.4.0-26-generic x86_64 bits: 64 compiler: gcc v: 9.3.0 Desktop: Cinnamon 4.6.6 
           wm: muffin dm: LightDM Distro: Linux Mint 20 Ulyana base: Ubuntu 20.04 focal 
Machine:   Type: Desktop Mobo: INTEL model: X99 serial: <filter> 
           UEFI [Legacy]: American Megatrends v: 5.11 date: 04/20/2020 
CPU:       Topology: 6-Core model: Intel Xeon E5-2620 v3 bits: 64 type: MT MCP arch: Haswell 
           rev: 2 L2 cache: 15.0 MiB 
           flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 57468 
           Speed: 1197 MHz min/max: 1200/3200 MHz Core speeds (MHz): 1: 1198 2: 1197 3: 1550 
           4: 1199 5: 1197 6: 1197 7: 1584 8: 1198 9: 1197 10: 1201 11: 1198 12: 1197 
Graphics:  Device-1: NVIDIA GP107 [GeForce GTX 1050 Ti] vendor: Micro-Star MSI driver: nouveau 
           v: kernel bus ID: 02:00.0 chip ID: 10de:1c82 
           Display: x11 server: X.Org 1.20.8 driver: modesetting unloaded: fbdev,vesa 
           resolution: 1920x1080~60Hz 
           OpenGL: renderer: NV137 v: 4.3 Mesa 20.0.4 direct render: Yes 
Audio:     Device-1: Intel C610/X99 series HD Audio driver: snd_hda_intel v: kernel 
           bus ID: 00:1b.0 chip ID: 8086:8d20 
           Device-2: NVIDIA GP107GL High Definition Audio vendor: Micro-Star MSI 
           driver: snd_hda_intel v: kernel bus ID: 02:00.1 chip ID: 10de:0fb9 
           Sound Server: ALSA v: k5.4.0-26-generic 
Network:   Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet driver: r8169 
           v: kernel port: e000 bus ID: 05:00.0 chip ID: 10ec:8168 
           IF: enp5s0 state: up speed: 100 Mbps duplex: full mac: <filter> 
           Device-2: Ralink MT7601U Wireless Adapter type: USB driver: mt7601u bus ID: 3-14:4 
           chip ID: 148f:7601 
           IF: wlx1cbfced2acbb state: up mac: <filter> 
Drives:    Local Storage: total: 476.94 GiB used: 26.82 GiB (5.6%) 
           ID-1: /dev/nvme0n1 model: X15 SSD 512GB size: 476.94 GiB speed: 31.6 Gb/s lanes: 4 
           serial: <filter> 
Partition: ID-1: / size: 466.29 GiB used: 13.36 GiB (2.9%) fs: ext4 dev: /dev/dm-1 
           ID-2: /boot size: 703.5 MiB used: 105.7 MiB (15.0%) fs: ext4 dev: /dev/nvme0n1p5 
           ID-3: swap-1 size: 980.0 MiB used: 0 KiB (0.0%) fs: swap dev: /dev/dm-2 
Sensors:   System Temperatures: cpu: 37.0 C mobo: N/A gpu: nouveau temp: 40 C 
           Fan Speeds (RPM): N/A gpu: nouveau fan: 0 
Repos:     No active apt repos in: /etc/apt/sources.list 
           Active apt repos in: /etc/apt/sources.list.d/alexlarsson-flatpak-focal.list 
           1: deb http: //ppa.launchpad.net/alexlarsson/flatpak/ubuntu focal main
           Active apt repos in: /etc/apt/sources.list.d/linuxuprising-shutter-focal.list 
           1: deb http: //ppa.launchpad.net/linuxuprising/shutter/ubuntu focal main
           Active apt repos in: /etc/apt/sources.list.d/official-package-repositories.list 
           1: deb http: //packages.linuxmint.com ulyana main upstream import backport #id:linuxmint_main
           2: deb http: //archive.ubuntu.com/ubuntu focal main restricted universe multiverse
           3: deb http: //archive.ubuntu.com/ubuntu focal-updates main restricted universe multiverse
           4: deb http: //archive.ubuntu.com/ubuntu focal-backports main restricted universe multiverse
           5: deb http: //security.ubuntu.com/ubuntu/ focal-security main restricted universe multiverse
           6: deb http: //archive.canonical.com/ubuntu/ focal partner
           Active apt repos in: /etc/apt/sources.list.d/opera-stable.list 
           1: deb https: //deb.opera.com/opera-stable/ stable non-free #Opera Browser (final releases)
           Active apt repos in: /etc/apt/sources.list.d/yandex-browser.list 
           1: deb [arch=amd64] https: //repo.yandex.ru/yandex-browser/deb stable main
Info:      Processes: 384 Uptime: 1h 33m Memory: 15.54 GiB used: 3.52 GiB (22.6%) Init: systemd 
           v: 245 runlevel: 5 Compilers: gcc: 9.3.0 alt: 9 Client: Unknown python3.8 client 
           inxi: 3.0.38

Код: Выделить всё

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
   workgroup = WORKGROUP

# server string is the equivalent of the NT Description field
   server string = %h server (Samba, Ubuntu)

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
;   interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
;   bind interfaces only = yes



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
   max log size = 1000

# We want Samba to only log to /var/log/samba/log.{smbd,nmbd}.
# Append syslog@1 if you want important messages to be sent to syslog too.
   logging = file

# Do something sensible when Samba crashes: mail the admin a backtrace
   panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# Server role. Defines in which mode Samba will operate. Possible
# values are "standalone server", "member server", "classic primary
# domain controller", "classic backup domain controller", "active
# directory domain controller". 
#
# Most people will want "standalone server" or "member server".
# Running as "active directory domain controller" will require first
# running "samba-tool domain provision" to wipe databases and create a
# new domain.
   server role = standalone server

   obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
   unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
   passwd program = /usr/bin/passwd %u
   passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
   pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
   map to guest = bad user

########## Domains ###########

#
# The following settings only takes effect if 'server role = primary
# classic domain controller', 'server role = backup domain controller'
# or 'domain logons' is set 
#

# It specifies the location of the user's
# profile directory from the client point of view) The following
# required a [profiles] share to be setup on the samba server (see
# below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
#   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
#   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the 
# SAMR RPC pipe.  
# The following assumes a "machines" group exists on the system
; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.  
; add group script = /usr/sbin/addgroup --force-badname %g

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap config * :              backend = tdb
;   idmap config * :              range   = 3000-7999
;   idmap config YOURDOMAINHERE : backend = tdb
;   idmap config YOURDOMAINHERE : range   = 100000-999999
;   template shell = /bin/bash

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 means that usershare is disabled.
#   usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
   usershare allow guests = yes

#======================= Share Definitions =======================

# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares. This will share each
# user's home directory as \\server\username
;[homes]
;   comment = Home Directories
;   browseable = no

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
;   read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
;   create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
;   directory mask = 0700

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.
# Un-comment the following parameter to make sure that only "username"
# can connect to \\server\username
# This might need tweaking when using external authentication schemes
;   valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   read only = yes

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = no
;   create mask = 0600
;   directory mask = 0700

[printers]
   comment = All Printers
   browseable = no
   path = /var/spool/samba
   printable = yes
   guest ok = no
   read only = yes
   create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
   comment = Printer Drivers
   path = /var/lib/samba/printers
   browseable = yes
   read only = yes
   guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
;   write list = root, @lpadmin


[share1]
path = /home/user/share1
valid users = user1, user2
read list = user2
write list = user1
browseable = yes

[share2]
path = home/user/share2
valid users = user1, user2
read list = user1
write list = user2
browseable = yes