раньше когда пользовался windows 7 пользовался Album Player - очень нравился, разработчик наконец-то сделал под linux http://albumplayer.ru/linux/index.html , попробовал установить, но что-то не получается
System: Host: lenovo Kernel: 4.15.0-45-generic x86_64 (64 bit gcc: 5.4.0)
Desktop: Cinnamon 3.6.6 (Gtk 3.18.9-1ubuntu3.3)
Distro: Linux Mint 18.3 Sylvia
Machine: System: LENOVO product: 3229AF8 v: ThinkCentre M92
Mobo: LENOVO model: MAHOBAY
Bios: LENOVO v: 9SKT39AUS date: 08/07/2012
CPU: Dual core Intel Core i3-2120T (-HT-MCP-) cache: 3072 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 10376
clock speeds: max: 2600 MHz 1: 1596 MHz 2: 1596 MHz 3: 1596 MHz
4: 1596 MHz
Graphics: Card: Intel 2nd Generation Core Processor Family Integrated Graphics Controller
bus-ID: 00:02.0
Display Server: X.Org 1.18.4 drivers: intel (unloaded: fbdev,vesa)
Resolution: 1280x1024@59.89hz
GLX Renderer: Mesa DRI Intel Sandybridge Desktop
GLX Version: 3.0 Mesa 17.0.7 Direct Rendering: Yes
Audio: Card Intel 7 Series/C216 Family High Definition Audio Controller
driver: snd_hda_intel bus-ID: 00:1b.0
Sound: Advanced Linux Sound Architecture v: k4.15.0-45-generic
Network: Card: Intel 82579LM Gigabit Network Connection (Lewisville)
driver: e1000e v: 3.2.6-k port: f080 bus-ID: 00:19.0
IF: eno1 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives: HDD Total Size: 250.1GB (21.7% used)
ID-1: /dev/sda model: WDC_WD2500BEKT size: 250.1GB
Partition: ID-1: / size: 46G used: 20G (45%) fs: ext4 dev: /dev/sda5
ID-2: swap-1 size: 6.10GB used: 0.00GB (0%) fs: swap dev: /dev/sda6
RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors: System Temperatures: cpu: 53.0C mobo: 27.8C
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 211 Uptime: 2:26 Memory: 1454.9/5764.4MB
Init: systemd runlevel: 5 Gcc sys: 5.4.0
Client: Shell (bash 4.3.481) inxi: 2.2.35
Desktop: Cinnamon 3.6.6 (Gtk 3.18.9-1ubuntu3.3)
Distro: Linux Mint 18.3 Sylvia
Machine: System: LENOVO product: 3229AF8 v: ThinkCentre M92
Mobo: LENOVO model: MAHOBAY
Bios: LENOVO v: 9SKT39AUS date: 08/07/2012
CPU: Dual core Intel Core i3-2120T (-HT-MCP-) cache: 3072 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 10376
clock speeds: max: 2600 MHz 1: 1596 MHz 2: 1596 MHz 3: 1596 MHz
4: 1596 MHz
Graphics: Card: Intel 2nd Generation Core Processor Family Integrated Graphics Controller
bus-ID: 00:02.0
Display Server: X.Org 1.18.4 drivers: intel (unloaded: fbdev,vesa)
Resolution: 1280x1024@59.89hz
GLX Renderer: Mesa DRI Intel Sandybridge Desktop
GLX Version: 3.0 Mesa 17.0.7 Direct Rendering: Yes
Audio: Card Intel 7 Series/C216 Family High Definition Audio Controller
driver: snd_hda_intel bus-ID: 00:1b.0
Sound: Advanced Linux Sound Architecture v: k4.15.0-45-generic
Network: Card: Intel 82579LM Gigabit Network Connection (Lewisville)
driver: e1000e v: 3.2.6-k port: f080 bus-ID: 00:19.0
IF: eno1 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives: HDD Total Size: 250.1GB (21.7% used)
ID-1: /dev/sda model: WDC_WD2500BEKT size: 250.1GB
Partition: ID-1: / size: 46G used: 20G (45%) fs: ext4 dev: /dev/sda5
ID-2: swap-1 size: 6.10GB used: 0.00GB (0%) fs: swap dev: /dev/sda6
RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors: System Temperatures: cpu: 53.0C mobo: 27.8C
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 211 Uptime: 2:26 Memory: 1454.9/5764.4MB
Init: systemd runlevel: 5 Gcc sys: 5.4.0
Client: Shell (bash 4.3.481) inxi: 2.2.35
не получается создать: файл конфигурации аудиосистемы /etc/asound.conf
это я сделал: Архив плеера рекомендуется распаковать в папку /usr, так как вспомогательные командные файлы используют путь к файлу плеера /usr/aplayer/aplayer.
это не делал, не совсем понимаю зачем, у меня : После распаковки архива надо однократно выполнить в папке плеера с root правами файл
pulseoff (команда sudo ./pulseoff в окне терминала) и перезагрузить систему. При выполнении
pulseoff в файл /etc/pulse/client.conf добавляется строка "autospawn = no", которая отключает
автоматический запуск сервера PulseAudio. Восстановить автоматический запуск сервера
можно, добавив ";" в начало этой строки (с перезагрузкой). Для временного включения и
отключения сервера PulseAudio можно использовать команды pulseaudio --start и pulseaudio
--kill. Во время использования плеера PulseAudio должен быть выгружен.
это цу меня на компьютере - client.conf:
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
## Configuration file for PulseAudio clients. See pulse-client.conf(5) for
## more information. Default values are commented out. Use either ; or # for
## commenting.
; default-sink =
; default-source =
; default-server =
; default-dbus-server =
; autospawn = yes
; daemon-binary = /usr/bin/pulseaudio
; extra-arguments = --log-target=syslog
; cookie-file =
; enable-shm = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
; auto-connect-localhost = no
; auto-connect-display = no
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
## Configuration file for PulseAudio clients. See pulse-client.conf(5) for
## more information. Default values are commented out. Use either ; or # for
## commenting.
; default-sink =
; default-source =
; default-server =
; default-dbus-server =
; autospawn = yes
; daemon-binary = /usr/bin/pulseaudio
; extra-arguments = --log-target=syslog
; cookie-file =
; enable-shm = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
; auto-connect-localhost = no
; auto-connect-display = no
помогите, пожалуйста, разобраться с установкой.