LinuxMint.com.ru

Вот что вижу.

Vaspet, А покажи-ка файл /etc/fstab и результат команды
fdisk -l (Она, кажись, с флешки без sudo запускается)

Общаюсь с телефона. Сейчас сфоткаю и выложу.

Извините. Пойду машину откапывать. Надеюсь за час откапаю выезд.

Vaspet, Ну у меня всё-равно мысли закончились.

Я так и не увидел попытки посмотреть на состояние диска. Если он сыпется - смысла в попытках восстановить систему на нем особого нет - опять упадет.

Подсказываю детально, после загрузки live подключаете сеть, и:

Код: Выделить всё

sudo apt update
sudo apt install smartmontools
sudo smartctl -a /dev/sdb

/dev/sdb - на основе предыдущей картинки. После новой загрузки может поменяться порядок и этот диск стать sda - проверьте через fdisk, данные нужны по hitachi.

Если запостите сюда вывод - подскажу по состоянию.

Только вошел. Спасибо, буду пробовать. Проверял викторией. Но побыв на свежем воздухе, вспомнил что в меню GRUB надписи были: Mint 20.3 и вторая строчка Mint 20.3 с дополнительными .... на русском
Может этот груб залететь откуда нибудь типа слетел. Но вин10 грузится именно с этого диска. На SSD лицензия, настроена по другому.

Я готов накрайняк снести, переразбить диск и установить с нуля. Просто хочется попробовать процесс восстановления. А когда всё работает не интересно.

Так, буду пробовать.

mint@mint:~$ sudo apt update
Ign:1 cdrom://Linux Mint 20.1 _Ulyssa_ - Release amd64 20210103 focal InRelease
Err:2 cdrom://Linux Mint 20.1 _Ulyssa_ - Release amd64 20210103 focal Release
  Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update cannot be used to add new CD-ROMs
Hit:3 http://archive.canonical.com/ubuntu focal InRelease
Hit:4 http://archive.ubuntu.com/ubuntu focal InRelease                         
Get:5 http://archive.ubuntu.com/ubuntu focal-updates InRelease [114 kB]        
Ign:6 http://packages.linuxmint.com ulyssa InRelease  
Hit:7 http://packages.linuxmint.com ulyssa Release       
Get:9 http://archive.ubuntu.com/ubuntu focal-backports InRelease [108 kB]
Get:10 http://archive.ubuntu.com/ubuntu focal-updates/universe amd64 c-n-f Metadata [20.1 kB]
Get:11 http://security.ubuntu.com/ubuntu focal-security InRelease [114 kB]
Get:12 http://security.ubuntu.com/ubuntu focal-security/universe amd64 c-n-f Metadata [13.1 kB]
Reading package lists... Done            
E: The repository 'cdrom://Linux Mint 20.1 _Ulyssa_ - Release amd64 20210103 focal Release' does not have a Release file.
N: Updating from such a repository can't be done securely, and is therefore disabled by default.
N: See apt-secure(8) manpage for repository creation and user configuration details.
mint@mint:~$ sudo apt install smartmontools
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Suggested packages:
  gsmartcontrol smart-notifier mailx | mailutils
The following NEW packages will be installed:
  smartmontools
0 upgraded, 1 newly installed, 0 to remove and 477 not upgraded.
Need to get 525 kB of archives.
After this operation, 2087 kB of additional disk space will be used.
Get:1 http://archive.ubuntu.com/ubuntu focal/main amd64 smartmontools amd64 7.1-1build1 [525 kB]
Fetched 525 kB in 1s (632 kB/s)        
Selecting previously unselected package smartmontools.
(Reading database ... 279190 files and directories currently installed.)
Preparing to unpack .../smartmontools_7.1-1build1_amd64.deb ...
Unpacking smartmontools (7.1-1build1) ...
Setting up smartmontools (7.1-1build1) ...
Created symlink /etc/systemd/system/smartd.service → /lib/systemd/system/smartmo
ntools.service.
Created symlink /etc/systemd/system/multi-user.target.wants/smartmontools.servic
e → /lib/systemd/system/smartmontools.service.
Processing triggers for man-db (2.9.1-1) ...
Processing triggers for systemd (245.4-4ubuntu3.3) .........................] 
mint@mint:~$

ne popal pod spoyler

Vaspet, а где вывод

Код: Выделить всё

sudo smartctl -a /dev/sdb

Вот пример:

smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.13.0-27-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family: Apacer AS340 SSDs
Device Model: Apacer AS340 240GB
Serial Number: AB20191205A0106691
Firmware Version: R1001A0
User Capacity: 240 057 409 536 bytes [240 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: mSATA
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 T13/2015-D revision 3
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Thu Feb 10 19:19:03 2022 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x11) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 10) minutes.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x0032 100 100 050 Old_age Always - 0
5 Reallocated_Sector_Ct 0x0032 100 100 050 Old_age Always - 0
9 Power_On_Hours 0x0032 100 100 050 Old_age Always - 6490
12 Power_Cycle_Count 0x0032 100 100 050 Old_age Always - 987
160 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 0
161 Unknown_Attribute 0x0033 100 100 050 Pre-fail Always - 100
163 Max_Erase_Count 0x0032 100 100 050 Old_age Always - 18
164 Average_Erase_Count 0x0032 100 100 050 Old_age Always - 384337
165 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 417
166 Later_Bad_Block_Count 0x0032 100 100 050 Old_age Always - 22
167 SSD_Protect_Mode 0x0032 100 100 050 Old_age Always - 184
168 SATA_PHY_Error_Count 0x0032 100 100 050 Old_age Always - 5050
169 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 97
175 Bad_Cluster_Table_Count 0x0032 100 100 050 Old_age Always - 0
176 Erase_Fail_Count_Chip 0x0032 100 100 050 Old_age Always - 0
177 Wear_Leveling_Count 0x0032 100 100 050 Old_age Always - 0
178 Used_Rsvd_Blk_Cnt_Chip 0x0032 100 100 050 Old_age Always - 0
181 Program_Fail_Cnt_Total 0x0032 100 100 050 Old_age Always - 0
182 Erase_Fail_Count_Total 0x0032 100 100 050 Old_age Always - 0
192 Unexpect_Power_Loss_Ct 0x0032 100 100 050 Old_age Always - 144
194 Temperature_Celsius 0x0022 100 100 050 Old_age Always - 35
195 Hardware_ECC_Recovered 0x0032 100 100 050 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 100 100 050 Old_age Always - 0
197 Current_Pending_Sector 0x0032 100 100 050 Old_age Always - 0
198 Offline_Uncorrectable 0x0032 100 100 050 Old_age Always - 0
199 UDMA_CRC_Error_Count 0x0032 100 100 050 Old_age Always - 0
232 Available_Reservd_Space 0x0032 100 100 050 Old_age Always - 100
241 Total_LBAs_Written 0x0030 100 100 050 Old_age Offline - 492278
242 Total_LBAs_Read 0x0030 100 100 050 Old_age Offline - 317677
245 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 428982

SMART Error Log Version: 1
Warning: ATA error count 0 inconsistent with error log pointer 2

ATA Error Count: 0
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 0 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 51 00 00 00 00 00 Error: ABRT

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
b0 da 00 00 4f c2 00 08 00:00:00.000 SMART RETURN STATUS
b0 d5 01 00 4f c2 00 08 00:00:00.000 SMART READ LOG
b0 d5 01 00 4f c2 00 08 00:00:00.000 SMART READ LOG
b0 d5 01 01 4f c2 00 08 00:00:00.000 SMART READ LOG
b0 d5 01 01 4f c2 00 08 00:00:00.000 SMART READ LOG

Error -1 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 51 00 00 00 00 00 Error: ABRT

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
b0 d5 01 00 4f c2 00 08 00:00:00.000 SMART READ LOG
b0 d5 01 00 4f c2 00 08 00:00:00.000 SMART READ LOG
b0 da 00 00 4f c2 00 08 00:00:00.000 SMART RETURN STATUS
b0 d5 01 01 4f c2 00 08 00:00:00.000 SMART READ LOG
b0 d5 01 01 4f c2 00 08 00:00:00.000 SMART READ LOG

Error -2 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 51 00 00 00 00 00 Error: ABRT at LBA = 0x00000000 = 0

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 10 b0 20 14 23 00 00 00:00:00.000 READ FPDMA QUEUED
60 08 a8 28 55 a8 00 00 00:00:00.000 READ FPDMA QUEUED
60 08 a8 28 55 a8 00 00 00:00:00.000 READ FPDMA QUEUED
60 10 a8 b0 0f 23 00 00 00:00:00.000 READ FPDMA QUEUED
60 08 a8 28 55 a8 00 00 00:00:00.000 READ FPDMA QUEUED

Error -3 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 51 00 00 00 00 00 Error: ABRT

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
b0 da 00 00 4f c2 00 08 00:00:00.000 SMART RETURN STATUS
b0 d5 01 00 4f c2 00 08 00:00:00.000 SMART READ LOG
b0 d5 01 00 4f c2 00 08 00:00:00.000 SMART READ LOG
b0 d5 01 01 4f c2 00 08 00:00:00.000 SMART READ LOG
b0 d5 01 01 4f c2 00 08 00:00:00.000 SMART READ LOG

Error -4 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 51 00 00 00 00 00 Error: ABRT

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
b0 d0 01 00 4f c2 00 08 00:00:00.000 SMART READ DATA
b0 d1 01 01 4f c2 00 08 00:00:00.000 SMART READ ATTRIBUTE THRESHOLDS [OBS-4]
b0 da 00 00 4f c2 00 08 00:00:00.000 SMART RETURN STATUS
b0 d5 01 00 4f c2 00 08 00:00:00.000 SMART READ LOG
b0 d5 01 01 4f c2 00 08 00:00:00.000 SMART READ LOG

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 5575 -
# 2 Short offline Completed without error 00% 4787 -

Selective Self-tests/Logging not supported

mint@mint:~$ sudo smartctl -a /dev/sdb
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-58-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family: Hitachi Deskstar 7K1000.C
Device Model: Hitachi HDS721050CLA362
Serial Number: JP1521HN038WPA
LU WWN Device Id: 5 000cca 35bc17e7f
Firmware Version: JP2OA25C
User Capacity: 500,103,634,432 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Thu Feb 10 16:22:35 2022 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 4768) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 80) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 098 098 016 Pre-fail Always - 131074
2 Throughput_Performance 0x0005 136 136 054 Pre-fail Offline - 94
3 Spin_Up_Time 0x0007 123 123 024 Pre-fail Always - 201 (Average 171)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 2360
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 134 134 020 Pre-fail Offline - 33
9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 3301
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1427
192 Power-Off_Retract_Count 0x0032 099 099 000 Old_age Always - 2375
193 Load_Cycle_Count 0x0012 099 099 000 Old_age Always - 2375
194 Temperature_Celsius 0x0002 176 176 000 Old_age Always - 34 (Min/Max 9/48)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 1

SMART Error Log Version: 1
ATA Error Count: 3
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 3 occurred at disk power-on lifetime: 2140 hours (89 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 10 00 00 00 Error: ICRC, ABRT at LBA = 0x00000010 = 16

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 10 00 00 00 e0 00 47d+03:24:46.107 READ DMA EXT
ea 00 00 00 00 00 a0 00 47d+03:19:32.400 FLUSH CACHE EXT
35 00 08 a8 e2 5b e0 00 47d+03:19:01.395 WRITE DMA EXT
ea 00 00 00 00 00 a0 00 47d+03:19:00.985 FLUSH CACHE EXT
35 00 08 b8 e2 5b e0 00 47d+03:19:00.980 WRITE DMA EXT

Error 2 occurred at disk power-on lifetime: 2129 hours (88 days + 17 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 05 3b e3 5b 00 Error: UNC 5 sectors at LBA = 0x005be33b = 6021947

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 38 e3 5b e0 00 44d+12:03:51.696 READ DMA EXT
25 00 08 38 e3 5b e0 00 44d+12:03:34.594 READ DMA EXT
25 00 08 b0 e2 5b e0 00 44d+12:03:34.593 READ DMA EXT
25 00 08 a8 e2 5b e0 00 44d+12:03:34.541 READ DMA EXT
25 00 08 10 08 00 e0 00 44d+12:03:34.539 READ DMA EXT

Error 1 occurred at disk power-on lifetime: 2129 hours (88 days + 17 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 05 3b e3 5b 00 Error: UNC 5 sectors at LBA = 0x005be33b = 6021947

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 38 e3 5b e0 00 44d+12:03:34.594 READ DMA EXT
25 00 08 b0 e2 5b e0 00 44d+12:03:34.593 READ DMA EXT
25 00 08 a8 e2 5b e0 00 44d+12:03:34.541 READ DMA EXT
25 00 08 10 08 00 e0 00 44d+12:03:34.539 READ DMA EXT
25 00 08 00 08 60 e0 00 44d+12:03:34.409 READ DMA EXT

SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

kak pereyti na russkiy s flachki

Vaspet, Пока не сыпется, но единичный сбой на поверхности есть. Мог быть причиной произошедшего, но скорее всего причина все же ниже. Но желательно прогнать тест поверхности с помощью victoria перед дальнейшими изысканиями, но после ниже изложенного:

Основное подозрение - проверить (или просто заменить на всякий случай) дата-кабель которым диск к материнке подключается. Одна из ошибок может быть им вызвана. И скорее всего именно в это время произошло первое зависание. А сейчас кабель периодически искажает данные, из-за чего файловой системе становится плохо. В общем-то, там скорее всего, проще переставить систему после замены будет.
Однако данная ошибка кроме кабеля может происходит по вине чипсета материнки или даже самого диска. Но это редко. Чаще всего - кабель.

Vaspet писал(а): ↑
10 фев 2022, 19:26
kak pereyti na russkiy s flachki

viewtopic.php?p=121052#p121052

Викторией прогонял днём, больше часа шарила. Правда только чтение, запись не рискнул. Буду переставлять систему и заменю кабель. Извините за напряг. Мне надо БУКВАРЬ и АЗБУКУ читать.. Книги я подобрал, а тут это.
Спасибо всем за помощь.

Vaspet писал(а): ↑
10 фев 2022, 19:58
Извините за напряг
...
Спасибо всем за помощь

Да мы тут и собрались чтоб друг другу помогать

При выборе линукс одним из факторов было то, что здесь живой форум. Встречались форумы с ответом на вопрос через два месяца. Правда непонятно прочитал автор или нет. Ответ остался без комментариев. Я в шоке был.

LinuxMint.com.ru

Минт 20.3 заболел, не грузится

Минт 20.3 заболел, не грузится

Минт 20.3 заболел, не грузится

Минт 20.3 заболел, не грузится

Минт 20.3 заболел, не грузится

Минт 20.3 заболел, не грузится

Минт 20.3 заболел, не грузится

Минт 20.3 заболел, не грузится

Минт 20.3 заболел, не грузится

Минт 20.3 заболел, не грузится

Минт 20.3 заболел, не грузится

Минт 20.3 заболел, не грузится

Минт 20.3 заболел, не грузится

Минт 20.3 заболел, не грузится

Минт 20.3 заболел, не грузится

Минт 20.3 заболел, не грузится

Минт 20.3 заболел, не грузится

Минт 20.3 заболел, не грузится

Минт 20.3 заболел, не грузится

Минт 20.3 заболел, не грузится

Минт 20.3 заболел, не грузится